0
That is not a Allen screw in there. That is part of the pump shaft. If you are looking to remove the pump pulley you will need a Power Steering pulley puller. This tool will help you remove it and replace it, without the puller you will damage the pulley or the pump or both.
Add your answer:
Earn +20 pts
How do you tighten a power steering pulley for a 1996 Chevy Pick Up?
The pulley is a press fit. If it no longer fits tight you need to replace it with a new one. This procedure requires special tools to remove and install the pulley to the pump. Some auto parts stores will rent the tools you need to do the job if you buy the parts from them.
How do you replace power steering pump in 1997 lumina?
First you must remove the upper portin of the fan shroud. Remove the belt, take a pully puller and pull the pully off the pump while it is still in place.undo the lines out of the steering sector(remember the high pressure line goes back in the hole closest to the engine block) Remove the three bolts behind the pulley, then remove the two nuts on the bracket behind the pump one is under the manifold and the other is on the bottom of the block. THen take the pump out remove lines and hardware and place on the new pump. WHen installing the new pump, put the pump back in place and the press the pully back on after you have put all the bolts back in the pump.
What is a belt tension pulley?
Most cars now have a serpentine belt that drive the alternator, water pump, power steering unit, etc. The belt tension pulley is a spring loaded pulley that keeps the proper tension on all these units. It can be moved to release the tension in order to remove the belt.
How do you remove the power steering pump alternator bracket on a 1995 Chevy Silverado?
I need help on how to remove my powersteering pump? You must first remove the power steering pump pulley. Most part stores have a tool loaner program so you can borrow the puller and and return it and get your money back. After the pulley is removed there are 3 bolts holding the power steering pump to the bracket. Pull those and the long bracket that is on the back of the pump and connects to the exhaust manifold and alternator and the pump should slide out. This information is for a 5.7L engine, but I believe it is close to the same for a 4.3L.
How do you keep the power steering pump pulley from turning when you try to loosen the bolt holding it to the pump on a 97 Suburban?
I a 97 pick up and the power steering pully is pressed on and pressed off
How do you remove power steering pulley 1995 suburban How do you lock the pulley in place to remove Allen bolt?
It requires a special puller to remove the pulley. There is NO bolt are Allen head that has to be removed. The pulley is pressed on. You will also have to get a special tool to put the pulley back on too.
How do you remove a power steering pulley on a 1997 Nissan Altima?
how to remove a power steering pulley on a 1997 Nissan altima
How do you remove the power steering pulley on a 355 Chevy?
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.
How do you remove pulley from power steering pump 95 Chevy silverado?
This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.
Hw do you remove power sterring pump pulley on a 91 Cadillac Seville?
Begin by removing the power steering pump belt from your 1991 Cadillac power steering pump pulley. Remove the power steering pump pulley retaining bolt. The retaining bolt will be in the center of the pulley.
How do you remove power steering pulley without removing power steering pump from your 1997 Buick Le Sabre?
It is not possible to remove the power steering pulley on a 1997 Buick Le Sabre without removing the power steering pump.
How do you remove the power steering pully on 1999 350 suburban with 4wd Is the Allen head bolt a right or left hand thread?
The Allen head is NOT a bolt. Go to an Auto parts store and get a Power Steering Pulley Remover tool. The pulley is pressed on, there will be instructions with the tool or ask the counter person.
Do you turn the power steering pulley remover clockwise to remove the pulley?
Yes you do.
How do you remove power steering pulley 2005 impala?
To remove that pulley with out damaging the pump or the pulley you need a power steering pulley puller. This tool will also install the pulley. Your local auto parts store can rent or sell you that puller.
How do you remove power steering pump from a 1995 Isuzu trooper?
Loosen the tensioner pulley. Remove the power steering belt. Remove the power steering hose. Remove the power steering retaining bolts. The power steering pump will come off.
Do you have to remove the power steering pulley in order to remove the bracket on a 93 Chevrolet pickup with a 350 Does the pulley have a bolt in the center?
power steering pulley is pressed on. to remove pulley, u need to completely remove pump from vehicle and take it to a mechanic that has right tools for removing
How do you remove the pulley on a power steering pump for a 97 gmc pickup?
That requires a special PULLER. Need a power steering pulley Puller.
