0
lift cover shield do one plug at time with plug spanner get some one to watch over you remove high tension leads one at a time put it back on right away after you have done one go to the next one don't do any more than one at a time a5min job can lead you to week if no help available
Carefully What engine? 4.6 or 5.4? Coil on plug, or do you have plug wires? If it coil on plug you have to unbolt each coil and pull them off the plugs one at a time
Add your answer:
Earn +20 pts
Why does the ignition cylinder go bad on a 2001 Chevy Malibu?
too much weight from too many keys cause the cylinder to wear out. try attaching key to breakaway keychain to reduce weight.
Ford Ranger 2001 4-cylinder sometimes won't start battery alternator wires wires to battery and starter are good?
Will it even crank? If it won't, you have an ignition switch or lock cylinder going bad. If it does crank, just not running, then check to make sure fuel pressure is good and that the ignition coil is good. When exactly will it not start?
Ignition was tampered with a screwdriver key will not enter the ignition need a part 2001 Chevy S10 pickup?
I'd call a locksmith. The ignition wil probably have to be drilled and replaced.
How much does it cost to replace the ignition switch in a 2001 Suburban?
$109.99 item#IG23401 at schucks.com
Why is the Security light on in a 2001 Chevy Blazer that doesn't even have a security system?
The 2001 Chevy Blazer does have an ignition security system that is controlled by the computer in the vehicle. The light might come on because of an error that is coming up in the computer due to a key problem or an ignition problem. This is a common issue with the 2000 and 2001 Blazer.
How do you change ignition cylinder on 2001 Monte Carlo?
how do i change a ignition cylinder on a 01 Monte Carlo
How do you change the ignition lock cylinder in a 2001 Chevrolet Tracker?
To change the ignition lock cylinder in a 2001 Chevrolet Tracker, first disarm the air bag system. Then remove the clock spring assembly to be able to remove the old ignition lock cylinder and replace with a new.
Where Is the Ignition coil on a 2001 Ford Expedition?
On a 2001 Ford Expedition : Both the 4.6 and 5.4 have the Coil On Plug ( C.O.P. ) ignition system with ( 8 ) individual coils
How do you change spark plugs on 2001 ford expedition?
how to change spark plugs on a 2001 expedition
Where is the 1 cylinder on a 2001 Ford Expedition 4.6l engine?
The 1 cylinder on a 2001 ford expedition 4.6l engine. Is located on the Pass. Side. The first one you see.
How do you change ignition coil in Nissan sentra 2001?
How change my ignition switch nissan 2001 sentra.
Where is the 5 cylinder on a 2001 Ford Expedition?
First cylinder up front on drivers side.
2001 Ford Expedition ignition coil locations?
at each spark plug
Where is the ignition coil located on a 01 Ford Expedition 5.4l V8?
Your 2001 Ford Expedition has the Coil On Plug ( C.O.P. ) ignition system so there are ( 8 ) individual coils
How do you change the ignition lock cylinder on your 2001 Dodge Durango If I don't have a key?
You will have to destroy the old one to remove, possible by drilling straight through it.
What is the cylinder order on 2001 Ford Expedition 4.6L V8?
On a 2001 Ford Expedition , 4.6 : The firing order is ( 1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 ) It has the Coil On Plug ( C.O.P. ) ignition system with ( 8 ) individual coils The engine cylinder locations are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
What is cylinder order on 2001 ford expedition 4.6?
On a 2001 Ford Expedition , 4.6 and 5.4 The firing order is ( 1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 ) The engine cylinder locations are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle It has the Coil On Plug ( C.O.P. ) ignition system with ( 8 ) individual coils
