Oldsmobile vehicles do not have inertia/reset switches.
Ni. If you don't have fuel preasure, check the pump relay.
if the vehicle won't start.
Reset the fuel shut off switch.
There is a fuel shut off switch in the trunk, ( INERTIA SWITH ) It needs to be reset, and theres a button on it , PUSH IT
We would need to know the vehicle to answer this. To my knowledge primarily Ford used roll-over switches to shut off the fuel pump, other manufacturers use different methods, not a shut-off valve.
The fuel pump inertia shut-off reset switch on a 1991 Oldsmobile Cruiser is typically located in the trunk area, often near the rear passenger side. It may also be found under the dashboard, close to the driver's side. This switch is designed to reset the fuel pump after a collision or sudden impact. Always consult the vehicle's manual for precise location and instructions.
Press the reset button.
Dodge does not have reset switches.
how do you reset the fuel cut-off shut switch on a 1995 ford econoline van?
There is none. Chrysler does not use inertia/reset switches.the fuel shut off switch is under the backseat
The Oldsmobile Cutlass fuel pump shutoff can be found on the firewall in the engine compartment. The fuel pump shutoff will be in the middle of the firewall.
There is no reset switch.
Chevrolet doesn't have a fuel reset switch. That's a Ford thing.
GM vehicles are not equipped with a fuel pump inertia switch.
Ni. If you don't have fuel preasure, check the pump relay.
Push the red button.
No.