0
Does 89 Ranger 2.3 Liter have a PCV valve and where on earth is it?
Wiki User
∙ 18y ago
Yes, the 1989 Ranger does have a PCV valve. I can speak for the 2.3 liter 4-cylinder version only. If you stand on the driver side of the engine compartment you will see the intake manifold (silver cast looking with the name Ford on it), on the bottom of the intake there is a 90 degree elbow (the intake forms a "Y" and if you look through the "Y" you can see the elbow) that points back toward the firewall. Connected to this is a rubber hose that routes back toward the firewall and then turns down at the firewall-side of the intake. If you follow this hose along you will come to the PCV valve. The valve is installed in the hose and connects to another rubber hose on the other side of the PCV valve. Hope this helps.
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
Where is the PCV valve on a 2002 Volkswagen jetta 2.0 liter?
The PCV valve on a 2002 Volkswagen Jetta 2.0 liter is located on the end of the rocker arm cover. It has one hose attached to it.
Where is the PCV on a 2001 Pontiac Grand Am 2.4L engine?
The 2001 Pontiac Grand Am 2.4 liter engine PCV valve is located on the firewall. The valve will be on the drivers side firewall in the engine compartment.
Where is the pcv valve located on a 3.8 liter 1989 Olds 98?
In the intake behind the throtle body.
Where is the PCV valve located on a 1995 ford ranger 3.0 liter?
The PCV valve is located on top of the engine, just right of the intake manifold. One end is pushed in the hose that comes out of the top of the valve cover, the other end goes to a short length tube connected to the throttle throat.
Can oil be sucked up into the intake through the PCV valve on acceleration but not at idle?
yes replace the PCV valve it cheep ,,
Where is the PCV valve Ford Ranger 2.5l?
The PCV valve, on your Ford Ranger 2.5 liter engine, is located on the outside of the air cleaner housing. The valve is on the back of the housing.
Where is the PCV valve on a 2002 Ford Ranger XLT 3.0 liter located?
On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.
Where is the PCV valve on a 2001 Ford Ranger with a 4.0 liter?
Hey Vince==It is in the valve cover. GoodluckJoe
Where is the PCV valve located on 4.0 2000 ranger?
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on the drivers side engine valve cover , on the top of the valve cover , near the REAR of the cover
Where is the PCV valve on a 1997 4 liter Ford Ranger?
I believe it is on the valve cover , drivers side of engine , towards the rear
Where is the PCV valve located for a 2000 Ford Ranger with 4.0 located?
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on top of the drivers side engine valve cover It is near the rear of the valve cover ( towards the firewall end )
Where is PCV valve on 1993 ford ranger 4.0 liter?
In the top of the valve cover , on the drivers side of the engine , near the rear of the valve cover , next to the firewall
Where is the PCV valve on a 98 s10?
There is no PCV valve on the 2.2 Liter engine.
Where is the PCV valve on a 1988 ford ranger 2.9 liter lacated?
It is located behind (toward the rear of truck) The oil add chamber on the passanger side valve cover. Pull the hose out of the valve cover and there you'll find the PCV Valve
Where is the PCV valve on 1998 ford ranger xlt 4 liter?
on the engine valve cover , drivers side , towards rear of cover , near firewall
Where is the PCV valve on a 1996 ranger 4.0?
On a 1996 Ford Ranger , 4.0 : The PCV valve is on top of the drivers side engine valve cover , near the rear of the valve cover
Were is the PCV valve on a 1992 f150 with the 5.0 in it?
where is the pcv valve on a 1992 f150 with 5.0 liter
