no you should not. You connect it to the PS1 power connection
Ring connection ensures continuety in supply
-- a power supply -- a load -- low-resistance material to connect the load to the power supply
The + or - 12V output connection.
motherboard
hard disk floppy disk cd-rom motherboard power supply at power supply atx case cpu fan ram video card Ide And Sata
The motherboard does not connect the power supply to the peripherals. The power is supplied directly to most peripherals such as HDDs and CD drives by cables from the power supply. Some special expansion cards, such as network cards, get enough power from the motherboard through the PCI slot to function.
power supply
You should not bother to check any power supply in the motherboard. You need to take the motherboard to service centre if faulty.
The fans usually connect to the motherboard, but they can connect directly to the power supply unit.
Case: Your motherboard must be able to fit in your case and must support your motherboard size (correctly placed standoffs). Power Supply: You can't have a shortage of power or else your power supply will get overloaded and "die", or even possibly explode for that matter.
Yep, that should be working fine. Just connect the 5770 to a PCI slot on the motherboard, and connect the power PCI power cable from the graphics card to the PSU (Power Supply Unit).
If you want to build a computer, then you need to make sure that all of the parts are compatible with each other. A computer must have a Power Supply, Motherboard, Processor, Hard Disk, and RAM to function properly. All of these parts screw into the computer case. The first step in building a computer is to make sure that you are properly grounded. Next, install all of the components on the motherboard, before the motherboard goes in the case. Install the compatible RAM into the proper slots on the motherboard. Next, install the processor. Then, attach the fan on top of the processor, to keep the fan from reaching high temperatures. Next, screw the standoffs into the case, to where the motherboard will go. Standoffs prevent the motherboard from touching the case. Then, lay the motherboard onto the case, on top of the standoffs, and screw the motherboard into place. Now, take the 20 or 24-pin AT or ATX cable from the power supply, and connect it to the proper port on the motherboard. Now, you need to connect the Power, Reset, and/or Front USB and Audio connections to the motherboard. Refer to the Owner's Manual for the Motherboard for this. Next, install the Hard Disk. Hard Disks can use either PATA or SATA. SATA operates at faster speeds. You can use either one, depending on the connections on the Hard Drive, and the motherboard. Screw the Hard Drive into the appropriate spot, inside the case. Then, connect the Hard Disk to the motherboard with either a PATA or SATA cable. Then, depending on the connections on the Hard Drive and Power Supply, connect a Molex or a SATA power connector to the Hard Drive. If your Hard Drive has both, only use one of the 2. Do not connect both SATA and Molex power connectors to the same drive. Next, install the CD/DVD drive, if you choose to use one. First, remove the cover for the drive by pushing on the cover, from the inside of the case. Next, slide the drive into the drive bay, from the outside of the case. Then, screw the drive in, using the appropriate screws. Then, connect the CD/DVD drive to the power supply, using either a Molex connector, or a SATA connector, depending on the type of CD/DVD drive, and Power Supply. Then, connect the CD/DVD drive to the Motherboard with either a PATA cable, or a SATA cable, depending on the type of CD/DVD drive, and Motherboard. Next, install the expansion cards into the appropriate slots on the motherboard, if you want to have any. To install an expansion card, first, make sure that there is an interface on the motherboard for the card that you have. Most cards have a PCI interface. First, unscrew the screw that keeps the cover for the expansion card on. Next, carefully insert the card into the appropriate slot on the motherboard. Next, screw the card in, using the appropriate screw. You have now built a computer. Next, connect all of the external peripherals to the external ports. Connect the mouse to either a Serial, Green PS/2, or USB connection. Then, connect the keyboard to either a Violet PS/2 or USB connection. Next, connect the monitor with either a VGA or DVI connection. Next, connect the RJ45 Ethernet cable to the RJ45 port, if you choose to do so. Or, if you are using dialup, connect the RJ11 Phone Line to the appropriate connection. Next, connect the Power connection to the Power Supply. If the Power Supply has a switch, make sure that it is switched to the on position. Next, turn the computer on, and install the Operating System. Make sure that the Operating System is compatible with the hardware in your computer.
The atx 12 connector is one of the motherboard power connectors and used for 12 volt power connect for cpu voltage regulator.
Were you able to install the card into the slot on the motherboard? And did you connect the little power cable from the power supply to the card? If you did both of these things, then it should work. Download and install the latest drivers for the card from Nvidia's website and that should do it.
if the motherboard is designed for the case fan you are using its best to plug it into the motherboard, this will free up a spot on the power supply. Otherwise as long as the voltage and amps are the same it doesn't really matter. If you try to plug it into both you will double the power of the fan and very likely fry the fan.
Connect Pin No. 14 & 15 on SMPS, if the fan moves then SMPS is working fine else SMPS is faulty.
Will a ATX power supply work with a ASUS motherboard?Read more:Will_a_ATX_power_supply_work_with_a_ASUS_motherboard