0
If you are talking about priming a new oil pump, priming until you get pressure on the guage is adequate.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
Where is the engine number on a new 350 crate Chevrolet engine?
On a machined surface pad located on the front of engine block just under the front of passenger side cylinder head.
How do you document crate dimensions?
Side side height.
Where are timing cover marks on ZZ4 crate engine the stationary indicator?
On the drivers side front, down under look for harmonic balancer at about the two o"clock position.
How do you load the crate on the ship in runescape pirates treaser?
It loads it's self, you just travel to the other side after you have put the rum in the crate, and in one of the crates there should be the rum, if there isn't you have done something wrong ( missed something out ).
What to do if your puppy stills potties in their crate during crate training?
If you were my client, first question I would ask you is in regards to the size of your crate in proportion to the size of your puppy. Unless a dog is sick or has been left in a crate for an extended period of time (more than 6 hours) most puppies will not potty where they sleep. If your puppy is in a crate that is too large for him, he will have the freedom to use the other side of the crate than he sleeps to relive himself. During puppy crate training, the crate should only be big enough for the puppy to stand up, turn around and lay back down. Some larger crates come with a divider so the crate can grow with your puppy. Also, the puppy should be in and out of his crate during the day, teaching the puppy that the crate is a safe place. For example, when you can't have your eyes on the puppy 100% of the time (doing chores, taking shower) the puppy should be in his proper size crate and should be rewarded when he enters the crate with either affection, or small treat. This will teach him that the crate is a good place to be.
How do you make a basketball goal out of a crate?
Some how get the bottom off of the crate and super glue some netting around the bottom of it. Then some how mount it somewhere out side and it should be good.
Were does the dipstick go on the 305 crate motor?
It depends on the year it was manufactured. Some of them are on the driver's side of the block, some on the passenger's side.
Where is the Fuel pump on 1995 BMW diesel?
There is one pump in the fuel tank which is accessible under the back seat on the driver's side which primes the system for startup , another pump is located in the engine bay to supply fuel to the injectors.
How jet engine different than other engine?
It spins blades in a way that compresses air and blasts it out the back side of the engine.
Wining noise while engine running from right side of engine 1995 Cadillac Deville Sedan?
Tensioner pulley for the water pump belt on the opposite side of the motor the other side, not the side with the surpentine belt.
What would problem be with a Chevy engine oiling on one side of the engine and not the other valve train?
Cam Bearings
Which way does thermostat go on a 73 Plymouth duster?
tee-pee side up, other side into the engine.
