answersLogoWhite

0


Best Answer

Yes, assuming the TH350 has the Buick-Olds-Pontiac bolt pattern. A Chevy TH350 will also bolt up, but you will need an adapter from B&M or another supplier.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
User Avatar

Anonymous

Lvl 1
3y ago
great thanks 4 the help

Add your answer:

Earn +20 pts
Q: Will a th350 transmission bolt to a Pontiac 400 motor?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What transmission will bolt to a 1978 301 Pontiac motor?

Any automatic trans from Buick, Oldsmobile, Pontiac or Cadillac will bolt right up. A Chevy transmission will NOT bolt up without and adapter. If you change from a TH350 to a TH400 you will have to change your drive shaft yoke and the cross member. Unless you just have one lying around, or find and extremely good deal on one, there is just about no reason to put a TH400 behind a 301.


Can a Oldmobile 350 fit a Chevy 350 transmission?

The bolt pattern on Chevy engines is unique. There are TH350 transmissions with both the Chevy bolt pattern and the BOP (Buick, Olds, Pontiac) pattern, but they are becoming somewhat rare.


Would a 1990 Pontiac Grand Am motor and transmission fit a 1992 Pontiac Grand Am?

yes it should bolt right up as well as the original motor and tranny


Can you bolt up a TH350 transmission to a jeep 2.5ltr motor?

It will "bolt up", but there is an issue with the torque converter. You will need to either have a standard torque converter machined/welded, or you will need to find the special torque converter that came on a 151/TH350 setup from the factory. I do not know if one actually exists, but I am looking.


Will a 350 Chevy motor bolt up too a 1979 Pontiac firebird transmission?

Some Pontiacs came from the factory with Chevy engines. If this is the case on your 79 firebird, then the transmission will bolt up to a 350 Chevy. If the car came with a Pontiac engine, then the bolt pattern is different and would not bolt up.


Will a Pontiac 400 transmission bolt on a 283 Chevy motor?

The turbo 400 transmition is widely used, it just depends on what motor it was originally bolted to.


What transmission will bolt up to a 307 Oldsmobile motor?

mostly any "old school' GM transmission that has the (BOP) bolt pattern will fit the 307 Olds motor. these (BOP) transmission have extra bolts holes so you can bolt to a Chevy and bucik, Pontiac, and Oldsmobile *** you can buy an adapter plate and bolt any engine you want to a 307***


How do you time a TH350 if there is a mark on the balancer but no pointer please?

you can get a pointer at many parts suppliers such as jegs or summit. it will be chrome but will still do the job. bolt on to the engine and then set timing.Just a note. A TH350 is a transmission. You can not time a transmission.


Will a th350 transmission fit a 283 engine?

The Chevy 283 engine has the standard bellhousing configuration and is compatible with transmissions that bolt to first generation small blocks. The automatic TH350 transmission will fit the 283 engine.


Will a 350 Turbo Transmission bolt up to a 454 Big Block?

As long as the TH350 is from a Chevy....yes.


A th350 transmission on a big block Chevy will it fit a small block Chevy?

Yes it will, it is the same bolt pattern.


Would a Buick turbo 350 transmission bolt up to a small block Chevrolet motor?

No. Buick, Olds, Pontiac, and Cadillac are the same. Chevrolet is different.