It depends upon the wattage of the light bulb. The lower the bulb wattage the lower the heat generated by the bulb. A 100 watt bulb should generate enough heat to destroy a rubber band.
Rubber doesn't melt. It'd char and burn.
it simply means that a wire from the light bulb is joined or connected to the charged plates of the capacitor.resulting to discharged of the capacitor.
A 13.5 volt bulb will burn less brightly but last longer.
The size of the bulb isn't related to the time in which it will burn out, it's related to it's quality and how many times you turn it on and off.
If a light bulb is handled roughly before it was installed, the filament holder could have been weakened. Another reason that bulbs burn out before their time is that they are being submitted to a higher voltage than the bulb rated for.
The filament (assuming an incandescent bulb) would burn up very quickly.
If you mean by rubber bands pieces of rubber, then the answer is Yes, rubber bands can burn.However, if you mean a musical band called rubber bands, then of course it doesn't burn unless they try to burn themselves in a suicide act.
A light bulb is dangerous because if leave it on too long it will burn.
Takes 300 hours for the average light bulb to burn out
You probably have a light bulb burn.
glass
If you use air instead of argon to fill a light bulb, the air will burn the light bulb.
it will burn
3 months
Takes 300 hours for the average light bulb to burn out
the first light bulb was created over 200 years ago but sadly the light bulb stopped working when a stanger took the light bulb from the museum 20 years ago.
The light bulb will probably burn out, if the fuse of the lamp does not burn out first. On the other hand, a lamp with 240V rating can still be used in the USA, but the light will be about half as bright for the same light bulb.
it simply means that a wire from the light bulb is joined or connected to the charged plates of the capacitor.resulting to discharged of the capacitor.