not legally (nec)
Approximately 127 cm length of a wire with a diameter of 1mm can be used to make a 1cm cube of metal.
The volume will be 1mm cube. It is calculated by 1mm*1mm*1mm.
Knudsen Gauge is among the few devices that were invented to measure pressures of the order of 10^-3 to 10^-6 torr(1 torr is equal to 1mm column of a mercury), i.e, very low pressures or degrees of vacuum.Other devices in this category include McLeod Gauge, Ionisation Gauge, Pirani Gauge and Thermocouple.It consists of two suspending vanes which are joint to make a rectangular frame suspended by a fibre.Further a mirror is fitted in the fibre to note the deviations of the pressure.Two fixed heated plated are located opposite to these vanes.Low pressure gas comes into the vessel through the inlet hole .The momentum of the heated particles is not altered by the fixed heated plates while this momentum causes the deflection of cooler vanes which is noted by the mirror using a lens mechanism. The expression for the pressure inside the vessel is : Pi= KF/[(Ts/Tm-1)^1/2] . Here K= constant for the gauge, F= Force which can be evaluated from the deflection and the elastic constants of the suspension fibre. Ts=Temperature of the stationary sheets,Tm= Temperature of the moving sheets.
1mm = 0.01dm
1mm
Approximately 127 cm length of a wire with a diameter of 1mm can be used to make a 1cm cube of metal.
If the wire length is 100m and the Diameter is 1mm calculate the Resistance of wire?
Nope.
1mm 1mm
Guage 18 in medicine is the size of a needle either for injections or for IV insertion.
Define the measurement
1mm converts to 0.000001km
If the circle has a RADIUS of 1mm then about 3,14 mm2 If the circle has a DIAMETER of 1mm then about 0,785 mm2
1MM in dollars is 1M=1K dollars 1MM=1Million dollars 1MMM=1Billion dollars
The volume will be 1mm cube. It is calculated by 1mm*1mm*1mm.
The surface area of a 1mm cube is 6mm2
1mm is 1 thousandth of a metre or 0.001 metres