A strong enough magnet brought close enough to the screen or to certain other parts of a television or computer monitor that uses a cathode ray tube will distort the displayed image.
This happens because a cathode ray tube image is created by shooting electrons at a phosphor-coated layer that glows where the electron stream strikes it. The stream of electrons is focused and targeted by magnetic fields within the TV tube. A strong enough magnetic field from another source will send the beam of electrons off target, distorting the image.
This does NOT happen with modern flat screen TVs and computer monitors because they do not use cathode ray tube technology to create the image.
The picture as seen on TV screen is due to moving charged particles (electrons).
The picture on a TV screen is formed by the help of beam of electrons.When a magnet is brought near the screen ,the beam of electrons will be deflected due to the magnetic field.Thus the target of the electron beam will be disturbed As a result ,the picture on a TV screen becomes distorted
The magnet will pull the electronic beam towards the magnet and will burn the phosphors on the inside of the CTR. The same thing will happen if speakers are positioned too close to the side of the TV. You won't get the burning but the picture will become distorted.
Of course, this only applies to older CRT televisions. Modern LCD displays are not affected by a magnet, as they have no electron beams to distort.
Yes. A magnetic field will attract the electron streams from the electron gun, causing distortion and color impurity. Also, it will magnetize the color aperture mask, leaving the distortion and color impurity behind. Degaussing will then be required.
(This applies to the cathode ray tube type of television; the more modern liquid crystal display is not as vulnerable to magnetic fields.)
The electric charges in motion produce magnetic fields. When a bar magnet brought close to the screen of a television we can observe that the picture on TV screen is distorted. ... This must be due to the fact that the magnetic field exerts a force on the moving charges. This force is called magnetic force.
When a magnet is brought close to the picture tubr
The
Try a magnet!
A magnetic field will not generate an EMF if there is no motion, so the primary factor causing a permanent magnet generator to not generate EMF is if it is not turning.
No. A magnet only interfers with magnetic fields ... lots of old IBMs used magnetic memory cards and that's where the stories started. It might erase a floppy disk, but an electro-magnet does the job much better than a perminant magnet.
Yes, but only if the magnet or the wire are kept moving.
Well, I'm not entirely sure, but if this helps, one end of the magnet is South (s) the other is north (n). The north attracts the south pole and the other way round. If north Poles or south) are put together they repel each other.
Yes - distorted or even erased.
When some pieces of plastics are brought near the magnet, they will get attracted.
No it can't become a magnet.
Lines of force go from a North pole of a magnet to the South pole external to a magnet, and through the magnet itself. This path is the magnetic circuit. It may be diverted and distorted by magnetic materials nearby.
That depends on which pole of the magnet it is moved close to. If it is brought close to the "South" pole of the magnet, the "North" pointer of the compass will be attracted to the magnet. If it is brought close to the "North" pole of the magnet, the "North" pointer of the compass will be repelled and will point AWAY from the magnet, while the "South" end of the compass pointer will point to the magnet.
If a bar of copper is brought near a magnet and rubbed it will get magnetized and would behave like magnet. But this would be temporary and this property would wear after some days.
Ask a Mormon only they know how they work.
gago.
gago.
With your MIND.
Get attracted and stick on together
yes.when you slice a rod magnet it will still be considered as a magnet