0
check fuel filter and pressure
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Why would a Chevy 2500hd duramax stall out at 2000 rpm?
The Chevy 2500 HD Duramax would stall out at 200 RPM because of mechanical failures. The mechanical failure will make it not operate at its optimum.?æ
What does a stall convertor do?
a stall will not engage trans until a minimum rpm is reach depending on rpm range of the stall converter
Why does my 1993 Ford Tempo try to stall when it idles?
because everyone elses 1993 ford tempos stall when they idle. learn to drive with one foot on the gas and one on the brake like I do in my '93 tempo. keep the RPM at 1000 and it won't stall out.
What is the RPM red line for the 2000 ford ranger 2.5 i4?
It's roughly 5500 rpm
How much horse power does the 2000 ford lightning have?
According to the 2000 Ford F-150 SVT supplement , the 2000 Ford Lightning 5.4 litre supercharged V8 engine is rated at ( 360 horsepower at 4750 RPM and 440 lb-ft of torque at 3000 RPM )
What would cause a chev s10 to stall at 2000 rpm?
Could use more info but, a plugged fuel filter could do that.
How much horsepower does a 2000 Ford Explorer v-8 engine have?
The 5.0 liter V8 in a 2000 Ford Explorer is factory rated at : 215 horsepower at 4200 RPM and 288 lb/ft torque at 3300 RPM
What is rpm red line for a 1993 5.8L ford bronco?
The highest safe RPM for a 5.8 liter Ford Bronco from 1993 is about 3,800. The engine will rev above that but it can cause damage.
Why does 1997 Jeep Wrangler stall when accelatrate?
I replaced the crank sensor and the cam pick up that is under the distributor cap and still the wrangler wants to stall or back fires and bucks at 1200 to 2000 RPM when accelerating
How much hp does a 2000 V6 mustang has?
ANSWER: The 2000 Ford Mustang 3.8L split-port v6 engine has 190Hp at 5250 rpm and 225 Ft-lbs of torque at 3000 rpm.
How much horsepower does a 2000 Ford Ranger 3.0 liter have?
The Ranger Station . com ( no spaces ) shows the 2000 and 2001 Ford Ranger 3. 0 L as 150 horsepower @ 4750 RPM and 190 ft/lbs torque @ 3650 RPM
What is the RPM redline for the 2005 ford ranger 3.0 v6?
i dont go above 5000 rpm for my 1999 ranger 3.0 v6 if that helps?
