0
Why do you need to remove a bit of the insulation from the end of the conducting wires?
Wiki User
∙ 6y ago
Your best choice is a pair of wire strippers what have cutting holes of various sizes to fit the wires you're stripping. If you don't have wire strippers, you can carefully use a knife or razor blade to trip the insulation away from the wire inside.
Wiki User
∙ 6y ago
Anonymous
Insulators are there to protect us from getting shock but they are not like conductors who can conduct heat or electricity. So by removing at least 5 mm, the copper will be then able to conduct because it is a good conductor.
Anonymous
Insulators are there to protect us from getting shock but they are not like conductors who can conduct heat or electricity. So by removing at least 5 mm, the copper will be then able to conduct because it is a good conductor.
Anonymous
Why do you need to remove a bit of the insulation from the end of the conducting wires?
User Avatar
Asked by Wiki User
0
1
2
User Avatar
Anonymous
Answered 3 minutes ago
Insulators are there to protect us from getting shock but they are not like conductors who can conduct heat or electricity. So by removing at least 5 mm, the copper will be then able to cond...
Read more
0
0
1
🙏
1
🤨
0
😮
1
😂
0
Add a Comment
Related Questions
Insulation Installation?
form_title= Insulation Installation form_header= Install insulation in your home. Does your home currently have insulation?*= () Yes ()No Do you need to remove insulation?*= () Yes ()No What room(s) need insulation?*= _[50]
Does a wire have to be insulated for electricity to flow?
No, overhead primary wires have no insulation on them and they carry the electricity to the consumers very well. Wires with no insulation on them just need more clearance space around them and between them to prevent the wires from short circuiting to each other or to ground.
How do linemen work on live wires?
Linemen work on live wires by using proper insulation gear, and by making sure that there is never any path for current to flow in case the insulation does fail. In some cases, the lineman can be raised to the potential of the line, but you still need the insulation, and you still need the technique of ensuring that no circuit can be accidentally created.
How do you remove insulation from your hair?
It may sound weird but you just need to put peanut butter on it
Why is there sparks coming out of your coil wire?
I suspect that you mean the sparkplug wires? Sounds like you just need a new set of wires since the insulation does deteriorate over time. --Ken
How do you change spark plug's and wires on a 3.5 Dodge Intrepid?
there are no wires. each spark plug has it's own "coil on top" remove the coil by pulling straight up . then remove and replace the spark plug. That wrong ther are wires on the 3.5 and it,s not easy you need to remove the intake manafold to remove & run new wires
Why not use an ohm meter to check leakage in a wires insulation?
An ohm meter doesn't put out enough voltage, you need to use a megger.
How can you remove spark plug wires without damaging them?
You can try twisting them on the plug to break the seal. Sometimes it is impossible and you need to replace the wires.
1992 marquis just stops running and you wait for a few minutes and then starts this only happens once and while what causes this.?
You could take it to a mechanic. Your car is 17 years old. Your wires are probably that old. You probably have a number of wires with cracked insulation. one of those wires is probably broken. It leads to a computer. When it gets hot, the ends no longer touch. When you stop the car, the ends come back together. You need to find that wire and replace it. Actually, you need to replace all the wires with cracked insulation.
How can I put insulation in my attic if I need to?
I have an attic with not insulation. Is is necessary to have insulation if we do not use it and how can I do this myself?
Why you need to measure insulation resistance?
To determine the integrity of the insulation.
Insulation Contractors?
form_title= Insulation Contractors form_header= Find the right contractor for your home. Does your home currently have insulation?*= () Yes ()No Does the insulation need to be repaired?*= () Yes ()No What room(s) need insulation?*= _[50]
Trending Questions
What pokediger1 password in roblox?
Asked By Wiki User
Why is TikTok getting banned in the US?
Asked By Amie Smitham
Which landmark is associated with Prudential Insurance Company?
Asked By Wiki User
How many countries end with a vowel?
Asked By Wiki User
1.7 equls how many tenths?
Asked By Wiki User
1+1?
Asked By Cherry
What is pokediger1s password on roblox?
Asked By Wiki User
What is the fourth element of the Periodic Table of elements?
Asked By Wiki User
Hottest Questions
Who is the longest reigning WWE Champion of all time?
Asked By Consuelo Hauck
What was the first TV dinner?
Asked By Roslyn Walter
Do dogs have belly buttons?
Asked By Wiki User
How long did the 1918 flu pandemic last?
Asked By Wiki User
What does the "S" in Harry S. Truman stand for?
Asked By Otis Rolfson
When do hummingbirds migrate?
Asked By Wiki User
How much caffeine can you drink if you are pregnant?
Asked By Wiki User
Are salamanders lizards?
Asked By Denis Block
Previously Viewed
clear
Why do you need to remove a bit of the insulation from the end of the conducting wires?
Asked By Wiki User
Unanswered Questions
Employee selection in India is a process of elimination and not an evaluation?
Asked By Wiki User
Of anybody who is like lam ang how is he similar to lam ang?
Asked By Wiki User
What is the conflict of Magnificence by Estrella D Alfon?
Asked By Wiki User
How did Rizal manifest his leadership in student activism at UST?
Add your answer:
Earn +20 pts
Does a wire have to be insulated for electricity to flow?
No, overhead primary wires have no insulation on them and they carry the electricity to the consumers very well. Wires with no insulation on them just need more clearance space around them and between them to prevent the wires from short circuiting to each other or to ground.
Why do you need to wires to carry current?
Conducting materials readily give and receive electrons from one atom to another. Electric current is actually the flow of electrons, so if it's difficult for the electrons to move, there will little or no current flow.
What size wire do you need for 900 amp?
That would need a busbar, an aluminium one with a cross section of 1 cm by 9 cm (or larger). <<>> A 600 MCM copper conductor with an insulation factor of 90 degrees C is rated at 475 amps. A 300 MCM copper conductor with an insulation factor of 90 degrees C is rated at 320 amps. A 3/0 copper conductor with an insulation factor of 90 degrees C is rated at 225 amps. These size wires can be installed in parallel 600 MCM, tripled for 300 MCM or grouped in four 3/0 wires groups to achieve the amperage required. Special parallel, three barrel and four barrel lugs have to be used to make the connection to the required load.
Why is copper wiring coated with insulation?
Because if the wire is "hot", that is, has electricity flowing through it, and you touch a bare wire, then YOU become the "ground" and complete the circuit. This will cause at the least a bad shock, and at the worst it will cause death. The "ground" wires are bare, but that is because they do not have electricity flowing through them unless something shorts out (ie a "hot" wire which is normally black or red in color touches a ground or neutral wire which is normally white. The "ground" wires are either bare or have a green coating.
What is a name that is given to an appliance that doesn't need an earth wire?
It is called Double Insulated because any "hot" wires (= "live" wires in British English) inside the appliance have been made safe by using extra insulation and/or fuses to protect the user from getting a shock if the appliance suffers any damage. That is why it does not need a separate earth or ground wire. Always be sure to switch off the breakers at the main panel before you attempt to do any work on any mains power circuit.
Does a wire have to be insulated for electricity to flow?
No, overhead primary wires have no insulation on them and they carry the electricity to the consumers very well. Wires with no insulation on them just need more clearance space around them and between them to prevent the wires from short circuiting to each other or to ground.
How do linemen work on live wires?
Linemen work on live wires by using proper insulation gear, and by making sure that there is never any path for current to flow in case the insulation does fail. In some cases, the lineman can be raised to the potential of the line, but you still need the insulation, and you still need the technique of ensuring that no circuit can be accidentally created.
How do you remove the rear window regulator 1994 town car?
To remove the rear window regulator on a 1994 town car, remove the screws under the arm rest. Take off the rubber insulation and unplug the speaker wires to get it our of the way. Finally, remove the window regulator.Ê
Why is there sparks coming out of your coil wire?
I suspect that you mean the sparkplug wires? Sounds like you just need a new set of wires since the insulation does deteriorate over time. --Ken
How do you remove insulation from your hair?
It may sound weird but you just need to put peanut butter on it
Why not use an ohm meter to check leakage in a wires insulation?
An ohm meter doesn't put out enough voltage, you need to use a megger.
How do you change spark plug's and wires on a 3.5 Dodge Intrepid?
there are no wires. each spark plug has it's own "coil on top" remove the coil by pulling straight up . then remove and replace the spark plug. That wrong ther are wires on the 3.5 and it,s not easy you need to remove the intake manafold to remove & run new wires
1992 marquis just stops running and you wait for a few minutes and then starts this only happens once and while what causes this.?
You could take it to a mechanic. Your car is 17 years old. Your wires are probably that old. You probably have a number of wires with cracked insulation. one of those wires is probably broken. It leads to a computer. When it gets hot, the ends no longer touch. When you stop the car, the ends come back together. You need to find that wire and replace it. Actually, you need to replace all the wires with cracked insulation.
How can you remove spark plug wires without damaging them?
You can try twisting them on the plug to break the seal. Sometimes it is impossible and you need to replace the wires.
How do you remove the spark plugs on a 1999 Mercedes E320?
You will first need to remove the coils and plug wires to access the spark plugs. The coils sit on top of the valve cover and are held in with small torx head screws. Then pry off the plug wires and remove the coil and wires together. Then you have access to the spark plugs.
Are loose wires on a starter fixable?
Sure just tighten them up. If need be, just cut the ends, strip off a little insulation & crimp on new connectors, then reinstall.
Insulation Contractors?
form_title= Insulation Contractors form_header= Stay warm with new insulation. What portions of your home need new insulation?*= _ [50] How old is your home?*= _ [50] How cold is your home in the winter?*= _ [50]
