0
Why cant the torque converter bolts line up on a 1995 gmc 3500 with a 350 engine after switching with the same engine?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which bolt to remove engine from transmission on 1989 Pontiac grand am 2.5?
Bell housing bolts and the torque converter bolts.
How do you take torque converter off of engine so you can mount the motor on a stand?
The Torque Converter is part of the transmission, not part of the engine. The torque converter needs to come off with the transmission. You need to remove the starter to access the torque converter bolts/nuts and separate it from the flex plate. Besides loosing all of the fluid in the torque converter, you stand to damage converter seals and/or the pump if the converter isn't properly installed in the transmission.
Where are the torque converter bolts on a 64' grand prix?
On the torque converter. Do a Google search and read about torque converters.
How do you replace torque converter on 1995 GMC Sonoma 700R4 transmission?
pull engine, unbolt torque converter from flex plate (3 bolts), fill new torque converter with ATF fluid(so it dont start up dry), place new torque converter on to the transmission input shaft, reinstall engine, from underneath now u can spin the engine over by hand to line up the bolt holes and tighten the torque converter to the flexplate.
How do you remove the engine from a 98 dodge ram 5.9L from torque converter The flywheel is in the transmission housing by about 2 inches and I cannot get at the bolts at flywheel torcque converter?
You have to pull the stater and grind a space in the adaptor for a socket to clear to the torque convertor bolts.
Do you have to drop the transmission to get to the flywheel bolts?
Torque converter bolts No. Fly-wheel bolts YES.
How do you remove the tourqe converter bolts from a 1992 Nissan Pathfiner?
After you have removed the cover from the lower half of the torque converter housing and driveplate you can remove the four bolts that secure the torque converter to the driveplate. Remove them one at a time by rotating the engine so that each bolt comes into view at the bottom where you have removed the driveplate cover.
Where is the bellhousing on a 1994 Chrysler New Yorker?
The bell housing is the part of the transmission case that bolts to the engine. It houses the torque converter.
Where is a transmission resivior for 2000 Lincoln ls?
There is NO "Reservoir" for a AX4N, Automatic Transmission. There is an oil pan and a torque converter which is between the engine and the transmission where it bolts to the engine.
Where is the torque converter located at on a 98 Chevy pickup?
It's between the engine and transmission. It slides onto the input shaft of the transmission and bolts to the flexplate on the engine.
How does the torque converter hook up to the flywheel?
Usually with bolts.
Where is the bell housing on a Jeep?
The bell housing is the part of the transmission case that bolts to the engine. The bell housing contains the clutch or torque converter.
