If you don't have insulation on the wire, then the loops in the coil will touch each other and short to each other. Instead of have x number of turns on the coil, you would basically have a solid conductor if the wire was not insulated.
A transformer is basically a coil of wire (or two coils).
If it were not insulated, the current would bypass the coils and it would not function.
prevent short circuits in the windings
If the solenoid wire is not insulated the number of turns will be reduced by the uninsulated wires touching and shorting out the turns.
Put the wires in your but!
ACT has thermoplastic insulated wires. AC is old MC is the modern cable.
Wires
they are useful to protect us from electric shocks.
what may happen if wires are not insulated
Unless otherwise specified, electric cables are insulated with a plastic material, which goes stiff in cold. If you ask for it special, you can get wires that are insulated with rubber or silicone instead, which stay soft in cold. But that costs more.
Aluminum wires are insulated.
Yes, of course they are insulated. If they were not the signals would short out and be unusable. If electric power cords were not insulated they would short out and blow the breaker (or worse start a fire)!
Most are insulated to keep them from grounding out or interference.
An insulated wire is made of a conductor surrounded by an insulating 'jacket'.
Except for the ground wire they must be insulated.
Insulated wires and such and batteries.
because all wires have different work. one carry positive charge, one carry nagative charge,and one is nuetral. they are of different colours because from this it can be easy to recognise the wires
Wires have to be insulated from each other to confine the current inside the wire. Most wires are insulated with a pvc sheath surrounding the copper wire.
Electronic devices are protected from power surges by having insulated wires
Copper is ideally used in wires in the creation of a household electric wire. this is because, copper is a very good conductor of electricity. to avoid anyone from getting shocks the copper wires need to be insulated by an insulating material, ideally plastic that is wrapped around them.