The protective device should be rated not more than 10 Amperes and be able to withstand a 1000Ampere short circuit.
You should know the maximum current drawn from the distribution box (in amps) and that must be less than the current that the extension cord is able to supply.
I assume you mean 125v, 12 amps and 1625 watts max extension cord. This is not technically a proper installation but it should work. The concern is how long are you running the extension cord and how and where are you making the splices. There are a lot of issues at hand that cannot be answered without more information. Electricians generally dislike extension cords. Usually the conductors are small enough they will MELT AND BURN at a current flow that will NOT TRIP THE BREAKER. You should consider it temporary at best. It should not be forgotten nor hidden in a wall or ceiling under ANY circumstances.
should not be used
There should not be any amp numbers on an extension cord. The only numbers you should see is the insulation rating which might be 75 or 90 degrees C and the conductor count and wire size. It should look like 14/2, 14/3 or 12/2, 12/3. What ever the combination is, the first number is the wire size and the second number is number of conductors in the cord.A # 14 conductor is rated at 15 amps, #12 at 20 amps, #10 at 30 amps. There are light weight extension cords that use #16 size conductors. My advice is to stay away from any cord smaller than #14. Best home owner cord is a #12 at 50 to 100 feet.Larger that #12 is used on construction sites and are usually made to order, for different types of portable equipment, by an electrician using twist lock ends so that they don't accidentally get pulled out.
It depends on the gauge of the wire, the length and the total current draw of the appliances. You said "heavy duty outdoor extension cord" so I'll assume 12 gauge wire. You can run a MAXIMUM of 20 amps for a MAXIMUM of 100 Ft on that wire. If the current draw goes up, so should the wire size. If the distance goes up, so should the wire size. 10 Ga wire - 30 amps for 100 Ft.
There should be at least 2 meg-ohms between the current carrying conductors and between current carrying conductors and ground.
If you mean the extension of current reactors, then no. As long as they are determined to be structurally sound after a thorough inspection.
You should know the maximum current drawn from the distribution box (in amps) and that must be less than the current that the extension cord is able to supply.
I assume you mean 125v, 12 amps and 1625 watts max extension cord. This is not technically a proper installation but it should work. The concern is how long are you running the extension cord and how and where are you making the splices. There are a lot of issues at hand that cannot be answered without more information. Electricians generally dislike extension cords. Usually the conductors are small enough they will MELT AND BURN at a current flow that will NOT TRIP THE BREAKER. You should consider it temporary at best. It should not be forgotten nor hidden in a wall or ceiling under ANY circumstances.
What should happen is that the circuit-breaker should trip to cut off the current before the transformer becomes damaged by overheating.
It is very easy to write an application letter for extension of overdraft. You should include all your personal details and explain the current position you are in. It is also important to specify how much time you need.
The benefit of purchasing a current business is, it has already been established in the market. It has clients and it is carrying on business. You steer clear of the hassle and cost of beginning on your own.
when you carrying a microscope you should use your hands
A Neutral represents a reference point within an electrical distribution system. Conductors connected to this reference point (Neutral) should, normally, be non current carrying conductors, sized to handle momentary faults (short circuits) occurring in electrical equipment. A Ground represents an electrical path, normally designed to carry fault current when a insulation breakdown occurs within electrical equipment. (Note: Breakdowns can be forced by connecting (dropping) a metal tool or conductive material from a voltage potential to the steel structure within a facility).
Any fixture containing metal other than the conductors should be grounded. It ensures the proper operation of the over current device, which is the breaker or fuse.
A letter should be written to the judge if an extension is needed for a court appearance. It should state the date of the court appearance and the reason needed for the extension.
They should not, but in real life conductors transform some energy and this is called "loss". E.g., electric wire heats up when the current runs through it, a little bit of electricity is lost (due to wire's resistance) in form of heat. Transformation of energy should be kept as low as possible since any transformation in a conductor is unwanted.