0
The oil filter is a canister type that is available anywhere it has been used in GM motors for a few years now. If you are under the car you are in the wrong place :) but from there if you see the starter on the drivers side of the motor it is right above that and can only be seen from the top of the motor. You will see a black cap with a 32MM nut on it that takes a special low profile socket to remove. once removed the filter just pops off the housing remimber to replace the O-ring and lubricate it before installing it. The manufacture recommends 18ft pounds of torque when reinstalling.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How many valves does the 2010 GMC Terrain have?
The 2010 GMC Terrain has 16 valves.
Is the 2010 GMC Terrain electric or gas?
The 2010 GMC Terrain is a gas-powered vehicle.
What size engine does the 2010 GMC Terrain have?
The 2010 GMC Terrain has an inline 4 engine.
What is the angle of departure of the 2010 GMC Terrain?
The 2010 GMC Terrain has a 23.2 degrees angle of departure.
What is the turning circle of the 2010 GMC Terrain?
The 2010 GMC Terrain's turning circle is 40.0 ft..
What is the maximum payload of the 2010 GMC Terrain?
The maximum payload of the 2010 GMC Terrain is 1162 lbs..
What kind of fuel does the 2010 GMC Terrain use?
The 2010 GMC Terrain runs on regular unleaded.
How long is the 2010 GMC Terrain?
The 2010 GMC Terrain is 15 ft. 5.3 in. (185.3 in.) long.
What is the angle of approach of the 2010 GMC Terrain?
The 2010 GMC Terrain has a 14.8 degrees angle of approach.
What is the cam type of the 2010 GMC Terrain?
The 2010 GMC Terrain has double overhead cam (DOHC).
What is the curb weight of the 2010 GMC Terrain?
The curb weight of the 2010 GMC Terrain is 3788 lbs..
How tall is the 2010 GMC Terrain?
The height of the 2010 GMC Terrain is 5 ft. 6.3 in. (66.3 in.).
