on most gm stick shift trans there is usually a plug nut on the side of the trans that requires a 3/8 ratchet and some times a short extension to remove it fill with 90 weight gear lube till it runs out of the hole it is full
On a 1990 Ford Ranger ; The 5 speed manual Mitsubishi transmissions ( trans code " D' ) take 4.8 pints of 80-90 W gear lube The 5 speed manual Mazda transmission ( trans code " M' ) takes 5.6 pints of MERCON automatic transmission fluid
A 5 speed (Mazda built) Manual transmission requires Mercon or Dextron II automatic trans fluid. A 4 speed requires 80w-90 gear lube.
Any Manual transmission can be towed with Manual Gear in Neutral; never engaged in a gear.
The transmission does not take gear oil. The auto uses ATF+4 and the manual uses manual trans fluid.
Be sure the trans is full with the proper lubricant.
the side of your transmission.. and its not a sensor its a gear.
The trans does not use gear oil. The auto uses ATF+4 and the manual uses a special manual transmission lube.
6.8 pints of 75W-90 Manual Trans Gear Lube.
synchro second and third gear, not first gear
I want to know how a manual transmission gear ratio worked. What ratio give the car mor power and what give the car mor speed.
depends on the transmission type. Automatics have the following. Vehicle speed sensor - Tells Computer how fast vehicle is traveling Gear Switch Circuits - Tells computer which gear vehicle is in for engine/trans management such as TCC. Manual Trans: - Vehicle speed sensor - Same as automatic High Gear Switch - Disables Upshift light above certain RPM/Throttle positions.
Need more info, manual steering gear box, power steering gear box, 3 speed standard transmission box, or 4 speed transmission box? The truck has a 3 speed manual transmission and power steering gear box thanks The steering gear box will interchange.