Wiki User
∙ 11y agoIt would be 50x. To find the magnification, you just have to multiply the number eyepiece and the number objective. So for example,
* A 10x eyepiece and a 40x objective would have a magnification of 400x
* A 10x eyepiece and a 100x objective would have a magnification of 1,000x
Wiki User
∙ 11y agoThe total magnification would be 200x, since the total magnification is the magnification of the objective lens X the magnification of the eyepiece.
its really good question that i know!!!by ur momma
5
That would depend on the magnification you are using.
No. It would have a magnification of 400. The resolution is not directly related to the magnification. It could be higher or lower.
multiply the magnification of the eyepiece by the magnification of the high objective lens. for example, if the eyepiece magnifies x10, and the high objective magnifies x40, then the total magnification would be 400x
The total magnification would be 200x, since the total magnification is the magnification of the objective lens X the magnification of the eyepiece.
20x objective
eg. If the lens piece you are looking through is X10 and the objective lens is X100 it would be x1000
MP=(d/L)*(1-(L-l)f) where d would be the distance from the eye to the image without a lens L is the distance from the eye to the new virtual image (with a lens) l is the distance from the eye to the lens this equation only covers a single lens (whereas there tend to be two in a microscope), but that's no worry; use it twice! (i.e treat both lenses as independent sources of the image)
The ocular lens are 10x magnification. Objective lens are 4x, 10x, 40x, 100x magnification. So once an objective lens is selected, the total magnification would be given by its product with the 10x magnification of the ocular lens. For example, if objective lens selected is 40x, total magnification would be: (10x)(40x)=400x total.
950
The total magnification is equal to the magnification of the eyepiece multiplied by the magnification of the objective lens. So in this case the objective lens would need to be 100X.
In a light microscope magnification is varied by using different lenses to refract the light. In an electron microscope magnification is varied by altering the configurations of magnetic fields to bend the electron beam.
its 600 you just multiply the numbers
The total magnification of the microscope when using the 40x objective depends on the strength of the eye piece lens. Typically a 10x eye piece lens is used in college microscopes this would give 40x10 = 400x magnification.
Using a 10X eyepiece, a student would need to use a 10X objective to have a final 100X magnification. 10 X 10 = 100X