the best pump is a sta-rite dura glas .. a 1hp is what i would use
pump eff. = (pump dynamic head x pump flow)/(pump h.p x 3960)flow=gallon per minute
A sump pump is submerged in a pit. It keeps house from flooding. A utiliity pump is used to pump water out of already flooded house, boat, pool, tank, etc....
Not usually, if the three phase pump is a three wire pump then the disconnect does not need a neutral. The pump control may or may not need a neutral depending on the voltage system that the control panel needs.
In self primming pump, there in no need for removing the air from in the casing. Eg piston pump
The circ pump is used to circulate the water thru the filter. The booster pump is for running the pool sweeper.
I have a 28,000 gallon pool and my pump is 1hp. Works fine.
one and a half horsepower.
Between a 500-gallon-per-minute pump and a 2,000-gallon-per-minute pump.
Depending on pipe size and the distance from the equipment to the pool, I would say 3/4 to 1 H.P.
Need to know what horse power you are thinking of. B T W the pump is not the filter. The filter is the large tank.
Less time for running a pool pump for a 30000 gallon should run one hour for every ten degrees. IE. 50 degrees F is equal to 5 hrs per day.
Approx 400gph return pump
Yes you can.
You could use your pool pump. or get a submersible pump. it is also not difficult to siphon an above ground pool with a pool vacuum hose. all you need is somewhere to run the water to.
1000galls howmuch per hour
Allow enough time for the pump to circulate every gallon of water one time. Number of gallons in pool divided by GPM will give you number of minutes divide by 60. This equals the time you need to wait to swim safely. Allow enough time for the pump to circulate every gallon of water one time. Number of gallons in pool divided by GPM will give you number of minutes divide by 60. This equals the time you need to wait to swim safely.
I have a 10 x 30 pool but i don't seem to need a pump and filter!