0
Actually what Cycling-rod said is not completely accurate. It depends on the printer model and how it feeds the paper into the machine. It also depends on what you mean by "top" and "bottom" because the way that it feeds in may not be how it feeds out and, thus, the top as it goes into the printer for the printing process may be the bottom when it completes its journey through the output assembly.
The best way to determine which side of the paper is printed is by looking at the input tray. If it shows an icon that looks like blank page with a corner folded over that has lines in it, then it is indicating that it prints on the bottom side of the paper as positioned in the paper tray. If, instead, the lines are on the main part of the icon and the corner is void of such lines, then it means that the top of the input paper is printed. These marks are usually imprinted into the plastic rather than stamped on with paint so that they will not wear off during use. If you cannot find it, however, mark a page as suggested by Cycling-rod and send a test page to the printer and see where your mark ends up. If it is on the side with the print job, you know that is the side that gets printed.
In general, inkjet printers have a semicircular (or C-curve) paper path which means that the side that is on the bottom in the input tray becomes the top when being ejected and it is on that side that the text is usually printed. The printers are designed to do this to prevent the obvious problem of smearing that could occur if the print side was down upon ejection. Because of this, most inkjet printer drivers reverse the page print order from last to first so that when the job is finished, the pages are in the preferred order for the user's convenience.
Laser printers on the other hand can have a number of paper paths internally. For example, the monochrome laser I have in my office has an S-curve path so that it inverts the paper from the paper tray and prints on what starts out as the bottom side and then inverts it again so that it is ejected with the printed side being back on the bottom. The color laser in my office, however, has a semicircular path just like the common inkjets.
I hope this helps. If you have any other questions, feel free to drop me a line and let me know.
Wiki User
∙ 9y ago
Wiki User
∙ 11y agoOn the under side of the paper when you put it in. To prove this, write "Top" on the top paper in the paper tray and print something. The resulting test printing should appear on the side not marked with "Top" - the under side.
Wiki User
∙ 14y agoThat depends on your printer, BUT...
If you're using high quality glossy print paper, always print to the glossy side.
If you're using high quality MAT print paper, just make sure you're printing on the side that the manufacturer recommends.
Some printers print to the top side (when in the tray), others print to the bottom.
Wiki User
∙ 12y agoThere's got to be thousands of models out there and you don't mention what you have, so, the easy way to find out is to put a big X on one side of the normal paper, remember how you put it in the printer, and print something.
When it comes out look what side the X is on. If you printed over the X then you know that's the face, if it printed on the opposite side then the X is the back.
Add your answer:
Earn +20 pts
What way would the paper go in the printer if you have already printed something?
This can depend on the printer, but normally the printed side is face up, you insert it printed side that you can see.
Is there a correct side up when loading paper into a printer?
The paper is the same on both sides so no there is not a correct side when loading paper into a printer, just pick one
What the meaning of two paper feeds for printer?
Some printers have multiple ways of feeding paper, for example: # A printer may have a tray for different sizes of paper or multiple types of paper of the same size. # A printer may have the ability to "sheet feed" paper OR use continuous form paper (that's the type with the holes on the side where the paper comes out as one long piece)
How do you do a double sided print with a single sided printer?
What I always do is remove all but one sheet from the printer tray and then print out the first side. After the first side is out I flip the paper around so that the print is facing you and starts at the top of the page and then feed it back into the printer. (If you do not take out the rest of the printer paper it will starting printing on a new page before you can turn the first sheet.)
How can you get your printer to stop cutting off the right side of a document?
use your reference guide that came with your printer if you have it and look under print margin specifications for what size paper you are using
Why does some printer paper have holes on its left and right margins?
The holes on the left and right margins of printer paper are called tractor feed holes and are used to help guide the paper through continuous feed printers. These printers use sprockets or tractors to ensure the paper is fed through accurately and consistently. Tractor feed holes are no longer necessary for most modern printers that use friction feed mechanisms.
Why does it take three tries before the the photo of Harrison appears right side up?
because they cant tell his face
What is auto duplex?
Auto duplex is when you can set your printer to print on both sides of a paper without you having to manually change the paper to the other side. So, if I want to print a 2 sided document, first, I print the odd pages, then I have to turn those pages around & put the blank side through the printer to print the even pages. If your printer has auto duplexing, it would feed those pages through by itself.
Printer says out of paper but paper is in printer?
There may be multiple problems with the printer (or the ink cartridges): Did you refill the ink cartridges? Use remanufactured ones? If so, then they may be: overfilled, heads/contacts worn out, ink level detector not reset (on some ink cartridges), etc. Is anything (that's part of the printer or ink cartridges) broken? If so, it may be too broke to work. Are the ink cartridges expired/dry? If they are expired, some printers say they don't detect them, thus they won't print. If they are dry, then they won't print. Try doing a head cleaning. Either with the printer's software, the printer's head cleaner button, or with cotton swabs and rubbing alcohol. Did you touch the ink cartridges (where the printer's/ink cartridges instructions) said not to? If so, clean them. Are the contacts on the ink cartridges/carriages dirty? If so, clean them. Is the paper loaded/inserted? If not, load/insert the paper. Are you using the wrong size/weight/amount of the paper? If so, please use the correct size/weight/amount of the paper. Is the printer communicating with the computer? If not, plug 1 side of the USB Cable into the printer, then plug the other side into the computer. Is the printer on? If not, turn it on. If this doesn't work, plug it in. Then turn it on. Does the printer have a paper jam? If so, clear the jam. Does the printer have objects in it? If so, get the objects out. Is the printer dirty (on the inside)? If so, clean it.
What do you think Circle has how many face?
A circle which is a plane figure, when drawn on a paper has 1 side.
Which side do you put up when copying a paper?
When copying a paper, you typically place the side you want to copy facing down on the copy machine glass. This will ensure that the image is properly transferred onto the new sheet of paper.
How do you put paper in a canon printer?
To load paper into a Canon printer, follow these general steps. Keep in mind that the specific steps may vary slightly depending on the model of your Canon printer, so it's a good idea to refer to your printer's user manual for precise instructions: Prepare the Paper: Ensure you have the correct type and size of paper that's compatible with your Canon printer. Most Canon printers accept standard letter-sized (8.5" x 11") or A4-sized paper. Open the Paper Tray: Locate the paper input tray or paper cassette. This is usually a pull-out tray or drawer located at the bottom front or rear of the printer. Adjust the Paper Guides: Inside the paper tray, you'll find adjustable paper guides. Slide these guides to match the width of the paper you're using. This helps keep the paper aligned properly. Load the Paper: Place a stack of paper into the paper tray with the printing side (usually the whiter side) facing down. Make sure the paper is neatly stacked and not bent or damaged. Adjust the Paper Size Settings: On some Canon printers, you may need to adjust the paper size settings on the control panel or in the printer's software to match the size of the paper you loaded. Close the Paper Tray: Carefully push the paper tray or cassette back into the printer until it clicks into place. Ensure that it's securely closed. Select Paper Source (if necessary): On some Canon printers, you may need to specify the paper source from which you want to print. You can usually do this through the printer's control panel or print dialog box on your computer. Print a Test Page: Before printing your document, it's a good practice to print a test page to ensure that the paper is loaded correctly and the print quality meets your expectations. Print Your Document: Once you've verified that the paper is loaded correctly and the settings are adjusted, you can print your document as you normally would from your computer or device. Remember that Canon printer models can vary, so always refer to your printer's user manual for specific instructions. Additionally, some Canon printers may have different paper-loading mechanisms, such as front-loading or top-loading options, so it's essential to follow the instructions provided for your particular printer model.
