Want this question answered?
The total timing advance on a 1995 Chevrolet 350 engine should be around 35 degrees. This takes into account the advance provided by the ignition system.
Chevrolet didn't make a 464
It has a timing chain that should last the life of the engine.
The timing should be set to Top Dead Center (TDC), but you must disconnect the electronic spark advance feature. Unfortunately, I don't know how to disconnect the spark advance. The timing chain is all that can be set. There is no way to set the timing as the distributor is not adjustable.
It does not have a timing belt. It has a timing chain which is normally good for the life of the engine.
That truck does not have a timing belt. It has a timing chain that will last the life of the engine.
Need to replace the electronic timing controll module. It is mounted over by the left valve cover, But bolted on the intake.
If this is a stock engine try anywhere from 4 to 8 degrees advanced.
The timing chain should last the life of the engine and not maintenance is normally required. It is replaced when the engine is rebuilt.
Timing chains are designed to last the life of the engine and are normally replaced during a complete engine rebuild.
The Chevrolet 4.3 liter V6 engine has a timing CHAIN
There were not any timing belts in 1966. The timing should be set at 4 degrees before top dead center. With the base timing, the centrifical and vacuum advance all together should be 35 degrees.