0
If you mean a bolt with a head size of 24mm (M16) then the recommended torque setting will be 210Nm but if you mean a head size of 36mm (M24) then the recommended setting will be 710Nm.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the torque setting for the lower ball joint on a Oldsmobile 88?
What year is the oldsmobile?, and do you need the torque setting for the nut?.
What is the specified torque settings for a suzuki samurai 88?
The question does not specify an object for which you desire a torque setting. In other words, what, exactly, do you want the torque spec (setting) for?
What are the head bolt torque settings for Toyota 3y engine?
Torque in three stages 14mm bolt: 34,61 & 88 nm. (25,45 & 65 FT.LBF) Torque 12mm bolts to 19 NM. (14FT.LBF) or go to... go to tercelonline.com the information you seek is there.
What are the torque specification for the head bolts for a 2001 Chrysler LHS 3.5L engine?
Using the 4 step torque-turn method, tighten according to the following values: - First All to 61 Nm (45 ft. lbs.) - Second All to 88 Nm (65 ft. Lbs.) - Third All (again) to 88 Nm (65 ft. lbs.) - Fourth + 1/4 Turn. Do not use a torque wrench for this step. NOTE: Bolt torque after 1/4 turn should be over 90 ft. Lbs. in the tightening direction. 1f not, replace the bolt.
What is the head bolt torque on a 91 Pontiac Le Mans?
don't know if they are same but an 88 lemans torque to 18 then two turns of 60 degrees then 30 degrees. if this isn't right check your local library they usually have great manual that you can copy pages out of.
What is the head bolt torque specs for a 2002 intrepid 3.5l?
* Step 1: All to 61 N·m (45 ft. lbs.) * Step 2: All to 88 N·m (65 ft. lbs.) * Step 3: All (again) to 88 N·m (65 ft. lbs.) * Step 4: + 90° Turn Do not use a torque wrench for this step.
What is the bolt pattern on a 1960 Oldsmobile dynamic 88?
the bolt pattern on your olds is 5 on 5inch. 72 to 88 cheavy half ton truck bolt pattern. snd. Danny b.
Can you drive a oldmobile 88 with one bolt on caliper?
NO!
What is the wheel lug torque of a BMW 328i?
88 ft lbs.
What is the wheel lug torque of a BMW 335i?
88 lb-ft
What are the torque specification for the head bolts for a 1997 chrysler LHS 3.5L engine?
I happen to own this particular car and have replaced the cylinder head gasket too. First tighten all bolts is a crossing pattern (like in a tire rotation) to 61 Nm (45 ft. lbs.) Second, 88 Nm (65 ft. lbs.) Third, (again) to 88 Nm (65 ft. lbs.) Fourth, with out a torque wrench, turn each bolt 1/4 in the tightening direction. Each bolt torque after 1/4 turn should be over 90 ft. lbs. If not, replace under torqued bolts.
What is the bolt pattern for 83 Oldsmobile delta 88?
my butt stinks
