what does the earth symbol for electric wirering look like in a socket
By earth wire I am assuming you mean the bare wire and that a black and white wire are connected to the light. If when you connect the earth wire and breaker trips then there is a short between black and earth. It could be a bad ground connection, an internal short in the light fixture where black wire "hot" is connected to metal on the fixture through a nick in wire.
In the visible spectrum or the infrared? Either way, if your earth wire is glowing you have a problem. Your earth wire is not intended as a current carrying wire. If the wire is loaded to the point that it glows then your circuit/breaker is not wired correctly and the earth wire is being used as an unintended path and is a hazard. Earth wires are not sized properly to carry current.
it is the earth wire
The outer core of the earth hasn't a chemical symbol.
It is earth wire
The symbol for Encore Wire Corporation in NASDAQ is: WIRE.
The symbol for Houston Wire & Cable Company in NASDAQ is: HWCC.
A 6 mm earth wire can be used to replace a 2.5 mm earth wire, but if there is an existing 6 mm earth wire it must be 6 mm all the way to the earth, and not replaced by a smaller wire between it and the earth connection.
Gaia represents the earth so her symbol is the earth or even fruits!
It is the earth wire
Foe a copper wire the symbol is Cu.
By earth wire I am assuming you mean the bare wire and that a black and white wire are connected to the light. If when you connect the earth wire and breaker trips then there is a short between black and earth. It could be a bad ground connection, an internal short in the light fixture where black wire "hot" is connected to metal on the fixture through a nick in wire.
The symbol for a wire is simply a line between circuit elements. The symbol for a resistor is a squiggly line. The related link goes directly to a picture of the symbol.
The symbol for Asia Pacific Wire & Cable Corporation Limited in NASDAQ is: APWC.
Earth wire
The inductor symbol resembles a coil of wire of 3 to 5 turns.
In the visible spectrum or the infrared? Either way, if your earth wire is glowing you have a problem. Your earth wire is not intended as a current carrying wire. If the wire is loaded to the point that it glows then your circuit/breaker is not wired correctly and the earth wire is being used as an unintended path and is a hazard. Earth wires are not sized properly to carry current.