From EPA website:
Emissions of SO2 from natural gas-fired boilers are low because pipeline quality natural gas typically has sulfur levels of 2,000 grains per million cubic feet.
However, sulfur-containing odorants are added to natural gas for detecting leaks, leading to small amounts of SO2 emissions. Boilers combusting unprocessed natural gas may have higher SO2 emissions due to higher levels of sulfur in the natural gas. For these units, a sulfur mass balance should be used to determine SO2 emissions.
P.S. 7,000 grains = 1 pound so in 1 million cubic feet of natural gas there would typically be 0.286 lbs of sulfur.
Natural gas, methane, contains no sulfur.
Pure natural gas is methane, CH4. But in practice natural gas contain also traces of helium, carbon dioxide, water, sulfur compounds and a variety of hydrocarbons.
For one cubic foot of natural gas: 1ft³ = 1031BTU 1ft³ = 1.08 Megajoules
Mercaptan. Methane, which is the primary ingredient of natural gas, is odorless and colorless. The gas company adds a chemical called mercaptan, which gives natural gas a recognizable sulfur or rotten egg odor.
Burning sulfur = CO2
Sulphur is contained in most fossil fuels, it burns as well. Answer: Sulfur in fossil fuels is present as sulfides, disulfides and mercaptans. The followig ist is brief comparison of the expected (nonnumeric) amounts to be expected by fuel type: * Coal - Low to High Sulfur content* Bunker Oil - Low to High Sulfur content* Heavy Diesel - Low to High Sulfur content * Diesel/Furnace oil - Low sulfur* Gasoline - Low sulfur * Butane - Low sulfur (a few ppm as odorant )* Propane - Low sulfur (a few ppm as odorant ) * Methane - Low sulfur (a few ppm as odorant ) * Natural Gas - Low sulfur (a few ppm as odorant ) * Sour Natural Gas - High sulfur* Refinery Off Gases - Low to High Sulfur content
Sulphur is contained in most fossil fuels, it burns as well. Answer: Sulfur in fossil fuels is present as sulfides, disulfides and mercaptans. The followig ist is brief comparison of the expected (nonnumeric) amounts to be expected by fuel type: * Coal - Low to High Sulfur content* Bunker Oil - Low to High Sulfur content* Heavy Diesel - Low to High Sulfur content * Diesel/Furnace oil - Low sulfur* Gasoline - Low sulfur * Butane - Low sulfur (a few ppm as odorant )* Propane - Low sulfur (a few ppm as odorant ) * Methane - Low sulfur (a few ppm as odorant ) * Natural Gas - Low sulfur (a few ppm as odorant ) * Sour Natural Gas - High sulfur* Refinery Off Gases - Low to High Sulfur content
Natural gas, methane, contains no sulfur.
oil, natural gas, natural-gas liquid, helium, salt, sulfur, and clay
Sweet natural as has essentially no sulphur.
If the fuel is coal, you simply have to switch to a coal with a lower sulfur content. You can remove the SOx from the flue gas with ammonia scrubbing. If the fuel is fuel oil a lower sulfur fuel oil can be used. Otherwise the oil must be treated in a hydrodesulfurization unit which is probably not economical due to the hydrogen required. If the fuel is natural gas, sulfur can be absorbed by absorption with a sulfur free amine such as MDEA (monodiethanolamine). The sulfur is later removed from the amine during the amine regeneration process which results in a sulfur rich stream.
Pure natural gas is methane, CH4. But in practice natural gas contain also traces of helium, carbon dioxide, water, sulfur compounds and a variety of hydrocarbons.
oil, rice, petroleum, natural gas, phosphates, sulfur, and minerals such as gold and many others
oil, rice, petroleum, natural gas, phosphates, sulfur, and minerals such as gold and many others
Some major natural resources in Iraq are petroleum, natural gas, phosphorus, and sulfur.:D :// :)
this is a natural occurence, dont be worried.
For one cubic foot of natural gas: 1ft³ = 1031BTU 1ft³ = 1.08 Megajoules