a gauze mat
Equiptment: Bunsen Burner, tripod, Gauze, heatproof mat, basin, stirring rod, spatula, measuring cylinder, Funnel, filter paper, Chemical; CuO+H2SO4First measure 20cm3 of sulphuric acid, H2SO4, using a measuring cylinder and pour it into the beaker.Take 1 spatula of copper (II) oxide and put it into the same beaker.stir the mixture using a stirring rod to ensure complete neutralisation of the acidAdd excess CuO if required.Filter the mixture into a basin.Turn on Bunsen burner but make sure it is on the heatproof mat, and then put the tripod on top of the Bunsen burner followed by the Gauze and basin containing CuSO4.Heat the filtrate until you begin to see crystals forming around the basin.Turn off Bunsen burner and leave to dry.
The water will evaporate
you put your water in the bursen burner then put in on heat the heat should be moderate to avoid vigorous boiling.Alway take note that you do not make the mouth of the bursen burner to face you put it the opposite side and do not lok in side the bursen burner.
It does not burn because it is putting it out basically.
Black carbon soot is deposited on the porcelain
A heat proof mat
A gauze mat is used below bunsen burners as it protects the tripod or surface which the bunsen burner might be on. It is most likely to be made of thick metal threads threaded into a mat or square. It is best if it is not touched during an experiment including a bunsen burner as it probably will result in mild to severe burns.
It gave him the idea to call it the Bunsen because he invented it and so he decided to put his surname as Bunsen and it is a burner so Bunsen Burner
You could blow up the bunsen burner.
The Bunsen burner goes under a thin, fireproof chemistry table.
what happens when you put pottery on a bunsen burner
in science, you'll put a gauze mat on top of a tripod( a thing like a stand) above a Bunsen burner. when you sit the thing you want to heat on the gauze mat, it will spread the heat across the thing as it is made out of metal.
a tripod is put over the bunsen burner
Used on top of a Bunsen burner so you can heat things. it normally has a gauze mat on it and you put a beaker, evaporating basin etc on top of it to heat.
You open th Bunsen burner. Then you use a metal grabber to grab the copper metal and put it on top of the Bunsen burner's flame. Soon the cooper metal will be kindled.
Water.
Asbestos does not burn and insulates. If the Bunsen burner should tip over or the material being heated by the burner should drop, the asbestos will protect the tabel underneath. Certain forms of asbestos have been found to be ealth hazards so now most often other minerals are used in the insulating mats in laboratories.