0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you align the drive plate with the crankshaft on a Dodge 318 engine in a Ram 1500?
The crankshaft and driveplate have an "offset" bolt pattern. If you look at both youll see the bolt pattern is misaligned intentionally so as the driveplate can only go on there one way.
Will a 1990 Dodge 360 tbi unit and intake bolt to a 1987 318?
no heads and intake are different form a 360 to a 318
What 4 speed transmission will bolt on a 1973 dodge dart with a 318?
any 4 speed tranny from a 340 engine will bolt to a 273, 318, or 360 engine as they are all the same engine block.
Will a 318 out of a 79 d100 bolt up to a 97 Dakota transmission?
probably not.
What kind of 4 speed manual transmission is in an 86 dodge D100 with a slant 6 and will it bolt up to a 318?
a-833 overdrive four speed. dodge started making them in 1975. it will bolt up to a 318 provided you have the correct bellhousing for the 318 as the ;leaning tower of power' bellhousing wont fit.
Will a dodge 2.5 4 cylinder manual transmission bolt up to a 318?
NoNo
Will a 2WD transmission interchange with a 4x4 tranny in a 92 Dakota automatic V8 and what years will interchange?
Yes, the tranfercase can be swaped over, the 3.9 v6 has the same bolt pattern as the 318 v8
Where is the PCV valve on a BMW 318 tds?
in the cilinder head cover.
How do you turn the distributor on a 1987 Chrysler Fifth Avenue 318 engine?
Loosen distributor clamp located at the base of the distributor with 1/2 socket on a swivel extension. The bolt is on the passenger side. Wanna help do head gaskets?
You pulled a 225 dodge 6-cylinder out will a 318 bolt in without modifing the motor mounts?
No. But there are companies that make adapter mounts which will allow it to bolt-in without modifications. (Not cheap.)
1997 dodge ram 1500 318 is the water pump press on pulley or bolt on pulley?
The factory installed pump would have been a bolt on. Most replacements have pressed on pulleys.
Can you swap a 318 from a 94 Dakota sport into a 68 dart?
you can make it happen but it's not a direct bolt in. computer issues
