F=ma
a=F/m
a=7500/1500
a=5m/s^2
a = F/m = 7500 N/1500 kg = 5 m/s2
1500
force = mass x accel = 1800 x 3 = 5400 Newtons
Think of it like this-- what would hurt more: getting hit by a go kart at 10 miles per hour or a Mack Truck at 100 mph? The 2nd would hurt more because there is a lot more Force (more mass in the truck and more acceleration from the impact. Though the vehicles in my example are not accelerating your body would be because it would be going from zero to 10, or 100 mph instantly)
The SI unit of force is the 'newton'. 1 Newton = 1 kilogram-meter per second2 A strain gauge is a common measuring device and is highly portable, which is a good thing when you wish to measure the pulling force of a harbour tug, the lifting capacity of a crane, or the mass of a truck on the highway.
For every action, there is an equal and opposite reaction.Example: The flying motion of birds is a good example of the Newton's third law. The wings push the air downwards. In turn the air reacts by pushing the wings (and therefore the bird) upwards. The size of the force on the air equals the size of the force on the bird; the direction of the force on the air which is downwards is opposite the direction of the force on the bird which is upward. For every action, there is an equal and opposite reaction. Tricky Question: Consider what happens when a small car collides with a heavy truck. Does the truck exert more force on the car, or does the car exert more force on the truck? Answer: Neither. They both exert the same amount of force on each other (Newton's Third Law). The car's acceleration is more dramatic because the same force is being applied to a smaller mass.
since a=f/m if you want to flow in traffic with a big mass you need a big force to match acceleration of other vehicles
The force required is 70,310 newtons.
1697
force on ground = mass * acceleration due to gravity (approx 9.82 (m/s)/s at earths surface) say truck mass = 10,000 kg then: 10,000 * 9.82 = 98,200 newtons acting down equaling this with upward force of 98,200 newtons = weightless truck anything greater than this force = upward acceleration (lifting)
Force = mass * acceleration and acceleration is in units of meters per second squared. I will assume you mean this. m/s2 Force = (1800 kg)(4 m/s2) = 7200 Newtons ----------------------
The work done by a truck pulling a trailer for a distance of 100 M while exerting a force of 480 newtons is 48000 newtons.
Force = mass * acceleration Force = (3000 kg)*(2 m/s^2) = 6000 Newtons ---------------------- ( that is 6000 times the force needed to push in a doorbell, on average )
the truck and the insect have the same amount of force....Newtons third law
The answer is: any force equal to or greater than the forward momentum of the truck. So many variables enter into calculating a precise measurement of force needed to stop a vehicle - mass of the vehicle, conditions of friction and gravity - is the truck going uphill or downhill, or on a flat surface? Is the road slippery, smooth or rough? Let's assume that normal conditions apply: a truck weighing 10,000 Kg traveling at an acceleration rate of 5m/s² along a flat smooth surface. Using Newton's second Law of Motion, expressed as a formula F=ma, where F is the Net Force (the sum of all forces acting on an object) in Newtons, m is the mass of the truck, and a is its acceleration rate, assumed here to be 5m/s². By multiplying the mass times acceleration, we see that a whopping 50,000 Newtons would be required to stop this truck. By comparison, the pull of gravity on a person of average weight (72 Kg, or 160 lb) is measured at 686 Newtons. So depending on the type of truck, weather conditions, wind speed, direction of the truck, and effect of gravity and friction (all included in net force, or Newtons) you can see that the actual Force, expressed as N, is a variable.
decreases
The mass of an object can be determined by taking (the net force in Newtons) divided by (the acceleration in meters per second per second).
fROM nEWTON'S 2ND LAW, F = ma where m = mass and a = acceleration F = 6000 x 2.2 = 13,200 kg-m/sec2 = 13200 Newtons
The Toyota would have more acceleration a= F/m if the mass of the of the Semi Truck is greater than the mass of the Toyota.