I read that it 500 rms to 1 Farad.
NONE! 600 watts is nothing you don't need one, but if you insist, one 1 farad would fix you.
yes it is i am running a 2500w and it is fine.
Farad
farad is the unit for capacitance in SI system. If one volt is developed as one coulomb charge is placed then capacitance has to be one farad. But one farad is enormous large one so practically speaking we use only micro farad, nano farad and pico farad. They are respectively 10-6 F, 10-9 F and 10-12 F
I have heard as a rule of thumb that you need 1 farad per 1000 watts, again that's just a rule of thumb and I'm no expert. Seems like overkill to power a 600W sub with that though, you might not need more than a 1 farad since the sub won't be able to handle much more than that
Farad = Coloumb / Volt; solving for Coloumb, you get Coloumb = Farad x Volt. Just plug in the numbers - 1 microfarad is a millionth farad; 0.001 microfarad - if that is what you mean - is 0.000000001 Farad; wherease 1 KV = 1000 Volts.
The Farad, of capacitance.
The Watt hour efficiency is the ratio of the amount of energy available during the discharge of an accumulator to the amount of energy put in during charge.
u should be good w a 3 Farad Cap, but did u do an apgrade called "Big3" and then, i might wanna get a bigger alternator, and a 2nd/new battery
A Farad is the electrical unit of capacitance. Many commonly used capacitors (also known as condensors) are measured in micro-Farads (μF). A micro-Farad is one millionth of a Farad. To convert from micro-Farads to Farads, divide the micro-Farad value by one million. 2 micro-farads = 0.000002 Farads.
K=(voltmeter range*ammeter range*power factor)/wattmeter range
The Farad is a measure of how much electric charge is accumulated on the capacitor. Named after Michael Faraday