Primary wire is a type of insulated copper wire used mainly for the electronic connections in automobiles and other low voltage electrical equipment.
Iron is considerd to be an alloy steel. This is because an alloy steel is when carbon is the primary alloying element. However, wire of iron is considerd to be a non alloy.
Yes. The neutral wire is grounded at the distribution panel, so that the live, or hot wire's potential cannot exceed a safe level above ground. Without this ground, neutral and hot would still have their specified voltage difference, but the voltage to ground could be arbitrary, such as the primary high voltage input to the transformer, creating an electrocution hazard.
grooved wire mean earth wire smooth wire mean suply wire
white wire = neutral bare wire = ground black wire = line voltage red wire = returned from a switch, or the other phase of line voltage in order to supply 240VAC
I am trying to find out myself, having found odd harmonics coming thru the neutral wire with my breakers open...I've been trying to identify the source of a strange hum/vibration in my home. If you mean the NEC, they have no power over electrical utilities. Your in home neutral wire should be at ground potential so there should be 0 volts to ground.
Yes, a step-up transformer has fewer turns of wire in the primary than in the secondary.
There are three primary types of wire springs: compression springs absorb energy as they are compressed, extension springs as they are extended, and torsion springs as they are twisted.
You size it by the current required by the secondary, and the primary will be smaller wire.
4000000VA/69000 = 57.97 amps, say a #6 wire. #4 to be safe.
How to compute for the size of wire in the primary side of 2500 kVA transformer 34.5kV
Primary wire comes from ignition key to hot side of coil.
A system malfunction in the Primary Heated Oxygen Sensor (Primary HO2S) (Sensor 1) heater circuit.The cause can be a loose wire or a defective Primary Oxygen Sensor
No, it has a primary resistance wire and if you are installing a electronic dizzy you need to bypass this.
Wire is used to create a frame, or skeleton, which holds the medium (clay usually) in place. Wire could also be used as the primary medium for a sculpture. Wire is pliable and easy to shape and hold that shape while other mediums are applied.
Close approximation of the primary and secondary coils makes for an efficient transformer. It is the rise and fall of the magnetic field that surrounds the wire in the primary that induces a current to flow in the secondary. The closer the wire producing the magnetic field is to the conductor being cut by the magnetic field (induction) the better the secondary output.
There is insufficient information in the question to properly answer it. While you specified the primary voltage, 34.5 Kv, you did not specify the current or the KVa. Please restate the question.
Photo Sensitive Drum, cleaning blade, and primary corona wire