answersLogoWhite

0

What is an RF input?

Updated: 11/12/2022
User Avatar

Wiki User

13y ago

Best Answer

An RF (Radio Frequency) input is the technical term for a coaxial/antenna input on the back of a television. This input is often referred to as simply 'cable' or 'cable vision'.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is an RF input?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is rf input in physics?

RF is used as an abbreviation of "radio frequency".


What is rf in?

radio frequency input


Is coaxl input on tv HDMI?

The coaxial RF input on a HDTV will process a HD signal but it is not an HDMI input.


What RF levels are commonly considered to be an indication of sufficient analog video level at the RF input of a TV set?

0 to -5


How do you calculate gain of an inverting and non-inverting OP-Amp configuration?

gain in an op-amp is the output voltage divided by input voltage. for the inverting amplifier , gain(Av)=-(Rf/Ri) ,where Rf => resistance of the feedback path & Ri=> inverting input terminal resistance for the non-inverting amplifier , gain(Av)=(1+(Rf/Ri)) , where Rf => same & Ri=> non inverting input terminal resisance


How can you tell if a sony High Definition tuner is built in?

If it is widescreen and has an antenna (RF) input.


Can you use an outdoor antenna with a flatscreen tv?

Yes, if it has an antenna input connector, (RF in).


Your HDTV does not have an hmdi input how should you connect your cable box to the tv?

In descending order of quality, Component, S-Connector then Video. The RF or antenna input is the poorest.


What is a rf scale?

An RF scale is a Representative Fraction (RF) Scale


Trying to use cable for morning announcements to classrooms only getting a blue screen using a VCR for input and output as well as a computer direct to VCR-tv?

Not sure what your computer does or not but the VCR is the source signal: coax from VCR out ("to TV" or "RF out") plugs into TV ("in" or "RF input"). Once hooked up, tune the TV to ch 3. Then play a tape in VCR and you should be ok. If all ok then plug in an antenna into the "RF in" (antenna in) on the VCR. Tune into a local station, you should be able to catch local programing. Cheers


What is HT640 RF encoder?

What is rf transmitter


What is rf surveying?

wt is RF SURVEY?