An air blast burner is a burner where a controlled blast of air is supplied the gas. The burner has an air blast type fuel injector.
Hot air is blasted into the blast furnace to burn the coke (a cheap form of carbon) added to form carbon dioxide.
the blast furnace got its name , because its bottom which is called a furnace blows hot air to go up.
You may be referring to an air circuit breaker or, more accurately, and air-blast circuit breaker. This is a type of high-voltage circuit breaker in which the electrical arc, drawn when it opens, is stretched and snapped by a blast of air directed between the separating contacts -so the air is used as a method of extinguishing the arc. Often, these breaker's mechanisms are also driven by compressed air.
Bleed air in gas turbine engines is compressed air taken from within the engine, after the compressor stage(s) and before the fuel is injected in the burner
Oil burner magic!!
the air valve at the base of the burner
The function that covers the air hole in a Bunsen burner is the collar.
Hot air under pressure
just it control the quantity of air supplied to burner .It is also called as damper.
Control of the ratio gas fuel/air in the burner.
The air inlet is on the burner tube; the flow is regulated with a rotating barrel.
The blast air that flattened Nicodemus was air.
The air hole in a Bunsen Burner allows air to mix with the gas prior to burning so that the flame can be adjusted as desired.
the burner stops burning
Three types of laboratory burners are the Tirrill Burner, Bunsen Burner, and the Meker Burner. The Tirrill and Meker Burner have air and gas adjustments while the Bunsen Burner has only an air adjustment. Hope that helps.
Striking back of a burner means that the burner's air hole is not open all the way. This causes an air shortage that needs to reach the gas. This results in too much air buildup through it, which causes the flame to burst out of the air hole.
the deffirence between terrill burner & bunsen burner is that terrill burner has a greater flexibility in the adjustment of the air-gas mixture which bunsen burner cannot .