answersLogoWhite

0

What is a y12 reinforce steel bar?

Updated: 10/31/2022
User Avatar

Wiki User

12y ago

Best Answer

It is a deformed round steel bar and has a diameter of 12mm.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is a y12 reinforce steel bar?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

What is the difference between steel bar Y12 and steel bar T12?

The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.


What is the density of a Y12 steel bar?

785okg/m3


With concrete reinforcement steel what does Y12 bar mean and what does R10 bar mean?

The numbers refer to the different diameters of the rebar used to reinforce the concrete. R specifies round bar. Y or N specify deformed bar. See below. == * Round mild steelreinforcement bar - R6 R10 R12 R16 R20 R24 R28 R33 * Deformed reinforcement bar - N12 N16 N20 N24 N28 N32 N36 * Stock lengths of reinforcement bar - up to 12 metres * S12 Pool Steel - Mild steel bars (not tempcore) that is very easy to bend by hand * Processed reinforcement bars - custom cut and bent to required needs * Dowel Bars - precut, often galvanised round bars used when one slab joins another * Galvanising - Plain Reinforcement Steel bars can also be supplied galvanised *Deformed Bar was previously called Y-Bar eg: Y12, Y16 but through product improvements the tempcore strength was increased (now 500Mpa) and is now denoted as N-Bar as listed above


What is welding slug?

A short piece of solid bar steel used when jointing 2 pieces of tubing. The tubes are slid over the slug, to reinforce the joint and it adds additional metal to weld too.


What is formula to calculate the weight of steel bar?

volume of steel multiplied by7850= wt of steel in kgs. Please note that wt of 1 Cum steel is 7850 kg Volume of steel bar can be calculated = cross-sectional area of bar X length cross-sectional area of Bar= pie x d X d/4 (where d is diameter of bar)

Related questions

What is the difference between steel bar Y12 and steel bar T12?

The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.


What is the density of a Y12 steel bar?

785okg/m3


How many steel bars of 12mm are in one ton?

170 Y12 Bar to the ton at 6000 M long


What diameter is a Y12 bar?

12mm


With concrete reinforcement steel what does Y12 bar mean and what does R10 bar mean?

The numbers refer to the different diameters of the rebar used to reinforce the concrete. R specifies round bar. Y or N specify deformed bar. See below. == * Round mild steelreinforcement bar - R6 R10 R12 R16 R20 R24 R28 R33 * Deformed reinforcement bar - N12 N16 N20 N24 N28 N32 N36 * Stock lengths of reinforcement bar - up to 12 metres * S12 Pool Steel - Mild steel bars (not tempcore) that is very easy to bend by hand * Processed reinforcement bars - custom cut and bent to required needs * Dowel Bars - precut, often galvanised round bars used when one slab joins another * Galvanising - Plain Reinforcement Steel bars can also be supplied galvanised *Deformed Bar was previously called Y-Bar eg: Y12, Y16 but through product improvements the tempcore strength was increased (now 500Mpa) and is now denoted as N-Bar as listed above


What is Y12 bar weight per meter run?

0.887 kg per m


How do you reinforce steel?

You can reinforce steel by either decreasing the span length or increasing the stiffness of the steel. Reinforcing steel improves safety and design effectiveness and decreases deflection.


How many y12 are in a ton?

There are 907,185.01 y12 in a ton.


How do you write 5x y12 in function form?

5X = Y12 ???? If so...., Y12 = 5X Y = 12th root(5X) ===============


What is 500W in steel bar?

500W in steel bar means this steel yields 500MPa strength


What is 500w steel bar?

500W in steel bar means this steel yields 500MPa strength


What is welding slug?

A short piece of solid bar steel used when jointing 2 pieces of tubing. The tubes are slid over the slug, to reinforce the joint and it adds additional metal to weld too.