0
Bromide Solution
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What halide produces a yellow orange color in hexane layer?
Bromine
Which is the hexane layer?
In a Halide Test, you can add an unknown solution into a test tube and add hexane solution plus several other solutions called by the procedure. Shake the test tube and record the upper hexane layer. So the answer would be hexane is present in the upper layer.
Do you observe the halide test in the upper layer or lower layer?
upper layer
Do you observe the halide test in the upper layer or the lower layer?
upper layer
Hexane is an organic solvent that has a density of 0.6603 g cm at 20c if hexane is mixed with water there is a separation of the two solvents into two layers why did this separation occur which solven?
Hexane is almost insoluble in water (Solubility = 9.5 mg per liter). With a density of 0.66, hexane is much lighter per unit of volume than water, which has a density of 1.0, so that when mixed, they will separate and the hexane will be on the top, leaving only a very small amount in the water layer (1.44% by volume). The upper hexane layer will also contain a little water (about 0.002% by volume)
What halide produces a yellow orange color in hexane layer?
Bromine
Which is the hexane layer?
In a Halide Test, you can add an unknown solution into a test tube and add hexane solution plus several other solutions called by the procedure. Shake the test tube and record the upper hexane layer. So the answer would be hexane is present in the upper layer.
Do you observe the halide test in the upper layer or lower layer?
upper layer
Do you observe the halide test in the upper layer or the lower layer?
upper layer
Do you observe halide in the upper or lower layer in a flame test?
upper layer
Hexane is an organic solvent that has a density of 0.6603 g cm at 20c if hexane is mixed with water there is a separation of the two solvents into two layers why did this separation occur which solven?
Hexane is almost insoluble in water (Solubility = 9.5 mg per liter). With a density of 0.66, hexane is much lighter per unit of volume than water, which has a density of 1.0, so that when mixed, they will separate and the hexane will be on the top, leaving only a very small amount in the water layer (1.44% by volume). The upper hexane layer will also contain a little water (about 0.002% by volume)
You are making a cake it is yellow in color but you need each layer be a different color you need a blue layer a red layer and a green layer What colors can you add to yellow cake mix?
Yellow cake mix already has yellow food coloring in it, which will effect any colors added. This should be no problem when adding green coloring, but the red will be tinted slightly orange. You might want to start with a white cake mix, which would give truer colors when dyed.
Does Hexane react with Bromine in the absence of ultraviolet light of intense heating?
the solution turns red and splits into two colours, red on top and yellow on bottom; after standing the top (red) layer turns colourless and opaque but there is no real reaction.
Hexane solube in water?
Yes. If you put water and hexane in a beaker or a container together, the hexane will be on top of the water. One way to see this is to dye the water. They do not mix because water is polar and the hexane cannot dissolve in it. It is on top because, guess why? It is less dense than water. That is why anything floats on water... it is less dense! Hope that answers your question!
What are the colors of each layer of the sun?
The different layers of the sun are yellow ,orange and red but there is also some white ! 2nd Answer: Not even close . . . The Sun is a bluish white-hot all the way through. The Sun may look yellow, orange, and red when there is dust and pollution between it and your eye.
What is the active layer in film called?
an emulsion of small particles of a photosensitive silver salt (Usually silver halide) suspended in gelatin
Describe an orange?
Let's see. An orange is roughtly spherical, an orange color, and a relatively smooth, but irregular exterior. When you peel it, this yellowish stuff gets on your hands that is really bitter. Inside, there is a white layr past the orange layer, and the white layer is actually sort of tasty. It is thicker on some oranges, and thinner on others. I prefer it thick. once you get to the center there are slices of orange that are delicious and packed with vitamin C. When you bite into one, the juice of the orange is released while still offering plenty of pleasurable chewing texture.
