0
What gauge battery cable do you use for a 1990 GMC truck engine?
Wiki User
∙ 16y ago
4 gauge wire.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you replace the battery cable on a 1988 Ford F250 truck?
Disconnect and remove existing cables Replace with new cable using the routing used by original cables + from battery to starter solenoid - From battery to good engine ground
What does a starter look like on a 93 Chevy pick up truck?
I don't know what model or engine you have but if you follow the positive battery cable from the battery, it will lead you right to the starter.
Alternaitve negative battery cable connection point for a 1985 Nissan truck?
Ground? Any good bare metal point on engine or frame
Can you clear the codes on your Chevy truck by taking the battery cable of?
You can if it's not newer then a 1998 model. If it's newer then a 98 then you will need a engine scanner to do that.
Where is the fusible link for 1996 Nissan truck?
on the positive battery cable
Where is the starters located on a s 10 truck?
There is only one starter per truck. If you follow the positive battery cable from the battery it will lead to the starter.
Where is starter on Chevy s10 truck?
Follow the positive battery cable from the battery, it will lead you right to the starter.
Where is starter located on 98 s10 truck?
Follow the positive battery cable from the battery, it will lead you to the starter.
Show a Wiring diagram for 2x12 volt batteries in series?
No, but I'll tell you how to do it... Put the two batteries in the truck. Call them "1" and "2." Hook the positive cable from the truck to the positive of battery 1, the negative cable from the truck to the negative of battery 2, and the series-wiring cable (it's about a foot long, and it's got a battery clamp at both ends) between the negative on battery 1 and the positive on battery 2.
How do you replace a starter on a 1993 Ford Ranger?
# Disconnect negative battery cable # Raise truck and support it # Disconnect the large cable from the terminal on the starter # Remove 4 bolts or nuts securing the starter and remove the starter from engine
Where is the fusible link on a 1982 Nissan 720 pickup truck?
on the positive battery cable
What would cause a Negative cable to overheat on an old fire truck?
Could be that the ground cable needs to be a larger gauge. The present ground cable may be too small causing too much resistance resulting it to heat up. Be sure all the ground connections (battery to engine block, engine block to chassis, chassis to body) are clean and tight.
