The rates of convergence and age of the lithosphere are the two predominant factors that affect the descent angle at a subduction zone.
We have to make a few assumptions first. We assume the angle provided (12.9 degrees) is the plane's attitude, that is, the angle with respect to the horizontal. We also assume the plane's nose is angled toward the ground because you asked for rate of descent (not dissent). We also assume that all of the plane's airspeed is in the same direction as its attitude (which is often not the case in actual flight, where an aircraft's velocity vector may have a different angle than the angle the plane makes with the ground). So, we have an airplane that's traveling at 278 km per hour at an angle that is -12.9 degrees to the horizontal. (The minus sign indicates a downward direction.) That describes a vector having vertical and horizontal components. We are interested in the vertical component, which is given by the formula Vy = Vsin(theta) = 278sin(-12.9) = -62.1. The rate of descent, therefore, is 62.1 km/hr. It is not necessary to use the minus sign if you say "rate of descent," because the minus sign is implied. If you are asked what the vertical velocity is, then you must use the minus sign to indicate whether it's positive (ascending) or negative (descending).
Elevation Prevailing Winds and Angle
A neap tide occurs when the sun and Earth make a 90 degree angle with each other. It also occurs when Earth makes a 90 degree angle with the moon.
The appearance of a surface is determined by several factors. These include the texture of the surface, the material it is made of, the way it reflects or absorbs light, and the presence of any imperfections or coatings. Additionally, the angle of observation and the lighting conditions can also influence the way a surface appears.
If thrown directly upwards, it slows down due to gravitational attraction and aerodynamic drag. It reaches a maximum height and then falls. Its rate of descent is accelerated by the earth's gravity but decelerated by aerodynamic drag. If thrown at an angle, it follows a trajectory in which the vertical motion is accompanied by horizontal motion which is decelerated by aerodynamic drag.If you disregard drag, then the vertical motion is symmetrical: at any height the speed going up is exactly the same as the speed on descent. Also, for a body thrown at an angle, the trajectory is a parabola.
density and age of the plate being subducted
The only roller coaster that has an angle of descent of 85 degrees in the Intimidator 305 in Kings Dominion in Doswell, Virginia.
The distance from the volcanic arc to the trench can be determined only by the dip of the angle of the subducting slab. A narrow and deep oceanic trench is formed along the subducting side of the island which the trace of Earth's surface between overriding and downgoing plates.
increase the angle of descent without increasing the airspeed.
The angle you are looking at, and the lighting.
angle between two edges and angle of incidence how denser the object is
Angle and what are the others
It depends on a few factors: if the angle is interior, if the angle is exterior, and if the hexagon is a regular hexagon or not. Each interior angle of a regular hexagon is 120o. Each exterior angle of a regular hexagon is 60o.
name the factors that affect the drift angle
It is simply the angle that the wing of the bird is to the incoming air force. This term is used when the birds are gliding or not flapping their wings. A change in this angle can cause the bird to be either more streamlined, cause lift, drag or even descent.
1.249 radians from the horizontal.
The Benioff Zone is formed when a piece of oceanic crust is being subducted into the mantle. This line of earthquakes follow the angle of the subducting plate as it slides beneath the continental crust.