Trouble code P0700 means: Automatic Transmission Control System Malfunction Trouble code P0720 means: A/T Output Speed Sensor - Low Output Above 15 MPH Replace the speed sensor and erase codes that should fix it.
P0700 EATX code present. P0731 Gear ratio error in first gear.
If you mean trans fluid, you pour it in the trans dipstick hole.
Trouble code P0731 means: Incorrect gear ratio, first gear
Trouble code P0732 means: Incorrect gear ratio, second gear
Trouble code P0733 means: Incorrect gear ratio, fourth gear
Trouble code P0733 means: Incorrect gear ratio, third gear Trouble code P0734 means: Incorrect gear ratio, fourth gear
Trouble code P0732 means: Incorrect gear ratio, second gear
Trouble code P0730 means:Incorrect gear ratio
Trouble code P0732 means: Incorrect gear ratio, second gear Trouble code P0735 means: Incorrect gear ratio, fifth gear Trouble code P0775 means: Pressure control solenoid "B"
po734 means incorrect gear ratio. It probably is telling you that the engine is not in the right gear range to produce the power you need or that it is in too low a gear and is in danger of over revving. Normally you won't see this on a vehicle with an automatic trans unless there is a transmission problem. I have same code and i had to put in tranny cause it did go out..what a job. engine on mine had to come out to get to it cause i dont have a shop or a lift.
What the code U1000 on a 2004 Nissan murano
Trans Fluid Temp Sensor A Circuit High Input