could be a sticky cable. I would go to your local parts store and get some powder graphite. Put some on each end of the cable and work the cable back and forth. If it is just sticky this should help. If it is a frayed cable it must be replaced. could also be a sticky throttle assembly, but I would start with the cable.
It is when the valines link up and causes the globins to stick
This reaction is called polymerization.
false
-- Stick it in a gas flame and heat it to glowing. -- Drop it on the floor or hit it with a hammer a few times. -- Stick it into a DC-current-carrying coil of wire for a while, in the direction opposite to the way the poles appear when you do the same with an unmagnetized piece of iron. -- Stick it into an AC-current-carrying coil of wire for a shorter while, in either direction.
because your hand is normal temprature then the ice needs to get to room temperature and then causes them to bind
If the cable appears to be in good shape, a dirty throttle body can cause that.
Carbon build up in the throttle body.
Latex paint can stick to the floor grouting.
dirt and gunk in linkages will cause accelerator to stick get some wd40 and spray on all moving parts if accelerator has a cable, renew cable as it will be clogged and rusted inside casing, making it stick
Nissan almera pedal sticking
Could be a bad throttle body
You stick your hand in the L drive, close your eyes, and hope for the best. God be with you.
with a hockey stick; throw it on the floor (:
Your Hands
Sure, could you please provide me with the sentence you would like the word "to" to be used in?
it has a sticky substance that is causing it to stick to the floor hope thats what you are looking for
Yes but you have to make sure you clean the floor first