Be it AC or DC any device who's nameplate reads 10 volts.
10 amps 250 volts or 16 amps 250 volts.
Watts = Volts x Amps x Power Factor Maximum Power Factor is 1 for resistive load.
120 power flows through a circuit with 1 amp and 120 volts.
Volts isn't power. Volts times amps is power, also known as watts. Thus 480 volts at 2 amps consumes 960 watts, which is the same power usage of 240 volts at 4 amps or 120 volts at 8 Amps.
There is no translation between volts and watts, they measure different things. Power (in watts) equals potential difference (in volts) times current (in amps) P=IV=(I^2)R=(V^2)/R
10 amps 250 volts or 16 amps 250 volts.
It means that a)the the power source gives outputs between 10 and 32 volts DC current OR b)The device needs beteen 10 and 32 volts DC current
Watts = Volts x Amps x Power Factor Maximum Power Factor is 1 for resistive load.
Power = Volts * current [p = E*I]; 120volts*10amps = 1200watts
120 power flows through a circuit with 1 amp and 120 volts.
Volts isn't power. Volts times amps is power, also known as watts. Thus 480 volts at 2 amps consumes 960 watts, which is the same power usage of 240 volts at 4 amps or 120 volts at 8 Amps.
Basically if you know the Voltage supply and the power used by an appliance then you use the formula for power which is Power = Volts x Amps. Rearrange so Amps (current) = Power / Volts If power was 2400 Watts and Volts was 240 the Current would be 2400 / 240 = 10 Amps
15 KOhms times 10 mA = 150 volts. 150 volts times 10 mA = 1.5 watts.
Power = volts times amps, so an appliance drawing 10 amps at a line voltage of 110 volts is consuming 1,100 watts. Keep in mind, however, that in a non purely resistive load, the phase angle of amps to volts might not be zero degrees, so the calculation becomes more complex, and depends on power factor, or phase angle.
There is no translation between volts and watts, they measure different things. Power (in watts) equals potential difference (in volts) times current (in amps) P=IV=(I^2)R=(V^2)/R
How to convert horsepower to amps? You'd have to make an assumption about volts. If it's running at 220 volts, that would make it 34 Amps. There are 746 watts in a horsepower and Amps = Watts/Volts.
230 volts