0
- Never place items, especially metal utensils, inside an electric appliance while it is plugged into a wall outlet.
- Children tend to stick paper clips or other small items they find in electrical outlets.
- Never forget -- water and electricity don't mix.
- Inspect wiring of equipment before each use. Replace damaged or frayed electrical cords immediately.
- Know the location and how to operate shut-off switches and/or circuit breaker panels. Use these devices to shut off equipment in the event of a fire or electrocution.
- Use safe work practices every time electrical equipment is used.
- Use only multi-plug adapters equipped with circuit breakers or fuses.
Wiki User
∙ 10y ago
Wiki User
∙ 13y ago1. don't touch bare or live
wires
2. don't get wet then touch electrical equipment
3. don't wear metal objects while touching electrical equipment
Wiki User
∙ 9y agoKeep away from live wires. Do not use faulty equipment.
Wiki User
∙ 9y agoWhen working on electrical equipment, the very best procedure is to disconnect the voltage at the distribution source and lock it off.
Wiki User
∙ 14y agoWear rubber gloves.
Add your answer:
Earn +20 pts
Is it safe to touch electrical components inside appliances that are switched off?
Wires and components can still hold a charge. Or, if defective, a component may give an electrical shock. Therefore, it is always best to unplug the appliance first and make sure your hands are dry.
Which metals are the best electrical conductors?
Copper is best
Can being in the strike radius of lightning be positive to the body?
No. At best you will not feel any effects or will only be momentarily stunned. The electrical shock can cause nerve and brain damage, or may lead to cardiac arrest. Thunder at close range can cause hearing loss.
Why is cooper used in electric wire?
Copper has optimal electrical, mechanical and chemical properties and is relatively cheap and available. Sum of all these parameters makes the copper the best choice for using in electrical engineering.
Which materials are the best electrical conductors?
Metals are the best conductors, Copper, Silver, and Gold for example.
What is the best practice for protecting patients from electric shock and injury?
People should not place their hands in light sockets, in order to avoid shocking themselves. People should also not mess with anything electrical, unless properly trained.
What is electrical best practice?
Follow national and international standards and codes.
How do you obtain phase 6 electrical craft practice questions?
A search on the Internet is probably your best bet.
What is the best indoor protective measures to avoid dengue orand other harmful insects is or are?
use of electrical insect killer
What could an electrical shock caused by cracking your neck be?
Typically, its usually caused by a pinched nerve. Its best to stay away from cracking your neck. You can cause serious complications.
Is it safe to touch electrical components inside appliances that are switched off?
Wires and components can still hold a charge. Or, if defective, a component may give an electrical shock. Therefore, it is always best to unplug the appliance first and make sure your hands are dry.
When was Best I Ever Had - State of Shock song - created?
Best I Ever Had - State of Shock song - was created in 2008-06.
Where from to define a best practice and benchmarking of production?
Practice is too failed to be best. Practice is more suitable
What is the best candy called?
Shock Tarts
Best shock absorber for 1999 trans am?
QA1 makes the best.
What are the electrical specifications needed to operate the tanning bed?
Most tanning beds require 220 volts. Most homes are not wired to supply this kind of power. It is best to call a certified electrician to install a dedicated circuit to avoid the risk of electrical overload.
What proper daily practices is an effective way to avoid infections?
Practicing good hygiene daily. wash your hands after using the bathroom, and do not eat food that smells or tastes unusual. Of these, washing your hands regularly is the best health practice to avoid infections.
