answersLogoWhite

0


Best Answer

A battery of the correct voltage and at least 520mAH rating.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What battery stack do I need for a device that uses 10.8 to 26.4 volts at 260mA maximum consumption to run for a minimum of two hours?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How long will a 5.4 ah battery last?

It would depend on the power consumption of the device in use.


What is turndown ration?

Turndown ratio refers to the width of the operational range of a device, and is defined as the ratio of the maximum capacity to minimum capacity. For example, a device with a maximum output of 10 units and a minimum output of 2 units has a turndown ratio of 5.


What does a receiving device do if it receives a frame that is less than the allowed minimum size or greater than the allowed maximum size?

the receiving device drops the frame.


WHAT THE ENGINE?

A mechanical device that can work by means of fuel consumption. A mechanical device that can work by means of fuel consumption.


How long will a 4100 Ah battery last?

There is a fairly simple method that can be used to calculate battery life, but you would have to know the power consumption of the device your 4100 Ah battery is powering up. If you hit the web and check out the DigiKey Battery Life Calculator, you can enter the requisite information and get a good idea of the battery life/run time.


Replace Your CR1632 Battery Instead Of Your Device?

When the battery in your electronic device dies, you do not need to replace the entire device. Open the battery compartment and write down the number on it. The CR1632 battery is made by different manufacturers, and is widely available at electronic, department stores and online. The cost of the battery is minimal, and is far less than replacing the device itself. In a disposable world, the only thing you have to dispose of is the old battery.


Which power source directs the electrons from oxidation-reduction reactions to flow through a device to give the device power?

a battery


How does a battery burn out?

A battery burns out by leaving the device that contains the battery on to long of a period of time.


What do battery connectors do?

Battery connectors are what connect batteries to devices so the device can get power from the battery. Electricity is the flow of electrons, and a battery has to have a way for the electrons to leave (negative wire) and return (positive wire). Thus the terminals on the battery are what do this, and battery connectors in a device or vehicle are what carries the electricity to the device or vehicle so it can be used. For instance, they electrically connect the battery to a laptop to power the computer.


Is a battery considered electricity?

The battery is not electricity. A battery is a device that stores energy in the form of chemical energy. When energy is taken out of the battery, it comes out in the form of electrical energy. And if the battery is rechargable, then energy is put into it also in the form of electrical energy. A2. There is sometimes a confusion, amongst non-technical people when discussing electrical items. A distinction is made between an AC mains operated device and a battery operated device. Calling the mains device 'electric' and the other 'battery'. A battery operated device is also 'electric', The current is DC and the voltage usually a lot lower (and safer) than the domestic supply. So yes. A battery operated device is electric. Batteries do produce electricity.


Can you change a 3.0v battery with a 3.6v battery?

Not unless you want to damage the device.


Is there a device that reduce a fuel consumption in a car?

No, there is not. There are lots of devices that claim to reduce fuel consumption but none of them actually work. Not one.