0
If you can't use gravity you have to use a pump of some sort.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is chain pump system of irrigation?
`Chain pump system of irrigation is a traditional method of irrigation.
Can you pump water to another pump?
Yes, You pump from one pump into a second to get a greater pressure boost. Be sure that the pumps and lines can handle the pressure increase. Improved answer. The above sounds like a simple series (one pump to another) connection. This is not recommended - the first pump must have *more* delivery (gallons/minute or litres/minute), or the second pump is likely to "starve" and go into cavitation. Talk to an irrigation/pump specialist. I solved the problem in my irrigation system by pumping from a bore (well) into a small dam, then from the dam into my tree/crop irrigation system. It was not practical to use the "two pumps in series" design implied by the first answer.
Method of irrigation that coserve water?
drip irrigation
Use irrigation in a sentence?
The farmers used an irrigation system to carry water from the river to their cropsLarge amounts of water are needed for irrigation."John started his irrigation system so his crops would have enough water to grow well."The farmer installed a new irrigation system to water his crops.
What dynasty of china was the irrigation pump invented?
The Shang Dynasty
What is chain pump system of irrigation?
`Chain pump system of irrigation is a traditional method of irrigation.
What is natural subsurface irrigation and artificial subsurface irrigation?
natural subsurface irrigation :- those areas which lie near to canal and roots zone of crops doenst require irrigation water Artificial irrigation :- by a network of pipe and pump water is provide to the root zone
Is the archimedes' screw an example of devices that applies hydrodynamics principle?
no, its an inexpensive hand operated water pump usually used for irrigation in third world countries. It elevates water from the main irrigation canal to the field irrigation ditches.
Understanding The Basic Types Of Irrigation Pumps?
Irrigation pumps are necessary for watering gardens, lawns and landscaped properties where there is insufficient water coming from a faucet or other outdoor source. They are required on large properties to boost pressure so that water can reach every last corner of the irrigation system. They are also useful on properties with natural water features like a stream, pond or lake that can be used for irrigation. There are four main types of irrigation pumps available. Homeowners should understand the benefits and complications of each type. Propeller-style irrigation pumps are the simplest and most direct way to move water across a property. The pumps can move a large amount of water and work with a variety of different water sources and irrigation systems. The primary drawback is that the pumps cannot move water up a hill or incline. They are designed primarily for use on large flat properties with few elevated areas. Centrifugal irrigation pumps are the most common and often the most versatile. These pumps come in many different sizes and can easily move water up inclines and hills. The pumps can use electrical power or even gas power depending on the size of the system. The flow rate is very consistent and controllable. The main complication is that centrifugal pumps must be primed before they will operate. A pump that runs without being primed could be damaged. Additionally, the pump needs to be close to the water source. Submersible irrigation pumps are designed to be placed into a body of water like a pond, lake or well. The pump sits underwater and uses electricity to move water upwards and into the irrigation system. Submersible irrigation pumps are effective and require very little maintenance after installation. The issues with submersible pumps are that they cannot service a large area like a centrifugal pump and they can overheat if the water around the motor does not keep moving. One final option is a turbine irrigation pump. This is similar to a submersible pump since it has to sit in the water. The pump uses impellers to move water up. Turbine pumps are strong and can supply water to large irrigation systems. The two complications are installation and maintenance. Both installation and maintenance for turbine irrigation pumps are more complex than with other pumps.
How did people use windmills?
I believe they were used for irrigation. definitely to pump water out of the ground whether for crops or not.
The dangers the Tigris and Euphrates rivers pose to farming with out human control?
without irrigation, the crops wouldn't get as much water as needed. with irrigation, they took the water from the rivers and connected it somehow to the crops for water.
Does babylonia go with irrigation?
of course Babylonia had a irrigation system, without water how would the plants in hanging gardens be able to survive, after all water is one of the building blocks to a Civilization.
How to do a work of the irrigation of the water or irrigation of drip?
some methord of irrigation for-conserving water
What do you call it when farmers water their fields with water from the ground or river?
Irrigation.
Modern methods of irrigation?
Types of Micro-Irrigation: Drip Irrigation (Both on-line and in-line systems) Sprinkler Irrigation System Micro sprinklers Micro jets Rain Guns Gravity fed Drip System Semi permanent sprinkler system.
Did Egyptian farmers use irrigation?
Without the water, low-rainfall Egypt was mostly desert.
What is intake in irrigation?
Intake is an integral part of any irrigation system. The intake is where water is drawn into the irrigation system, either from a body of water or from a water system. This water is then distributed through the irrigation system to water the plants.
