20nm +180 degree +180 degree
in sequence torque bolts to 20nm, then again in sequence turn a futher 120 degrees, and again in sequence 120 degrees.
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
The torque settings are 40 to 45lb/ft for the outer row, 65 to 70 for the centre to inner row. Haynes (Methuen & Coomber 1999) doesn't specify any particular order for refitting the head bolts; follow the standard automotive practice of tightening the ones furthest apart and moving inwards.
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
Just criss-cross on the bolts and don't tighten them all in sequence, just like tightening lug nuts on a wheel.
Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .
Tighten the valve cover retaining bolts in sequence, torque them to 71-106 inch lbs. (8-12 Nm).
which one? The head bolts? Engine to transaxle? And, are you really asking what the tightening sequence and/or torque rating is?
45,65,65 ft lbs then 90 degrees.
http://wiki.answers.com/Q/What_are_the_torque_settingsand_tightening_sequence_for_the_cylinder_head_bolts_on_a_kia_sedona_2.9 the cylinder head bolts on a kia sedona 2.9?"
New Headbolts are recommended Long bolts are torqued to 46'lbs + 90 degrees. Short bolts are torqued 43'lbs + 90 degrees. Start in the center, and work to the edges, torquing the bolts in two stages. Rockers are torqued to 22'lbs.