Friction.
Gears working together can be a simple machine in themselvesA Gear Train is a complex machine made up of wheel, axles and gears
what is the different kind of simple machine ?wedge, screw, inclined plane, pulley,wheel.
Not the whole part of the bike but the pedals are levers a kind of simple machine it uses the levers to apply force to the sprocket sprocket is a wheel and axle ,another simple machine,that uses gears to move the chain.
it will as it is connected to your wheels
Wheels and axles are used in innumerable ways in the modern world. Life wouldn't be the same without them. They are used in everything from doorknobs, to screwdrivers, to anything with an engine (car, boat, etc), or any machine with gears. Land transportation ranging from cars, motorcycles, bicycles, trucks, buses, and most trains use wheels.
Friction is decreased.
if you don't keep your chain and gears on your bike greased it will rust and come off.
The gears on a car provide the power to drive the wheels.
Most treadmills that are used often should be maintained on a regular basis. Since the gears in a treadmill need to be greased every so often for the machine to work correctly, this should be done as often as one is wearing the machine out.
Gears working together can be a simple machine in themselvesA Gear Train is a complex machine made up of wheel, axles and gears
The years 1990 to 1993 ford use 3.50 gears was upgraded with stronger 3.35 gears sets by adding the nickel content. This was to make the gears hard and strong and to make the 2nd and 3rd gears decrease a little to give it more torque to the rear wheels.
Gears are wheels with teeth that fit together.
Yes it is.
Wheels and gears are important in our daily life, because they help us in our daily transport, and also used in our industries.
what is the different kind of simple machine ?wedge, screw, inclined plane, pulley,wheel.
Gears were invented in 27th century B.C. One of the first types of gears created was to rotate wheels for chariots.
He was a mathematician who developed the "Pascaline." This was the first mechanical adding machine. The Pascaline was wooden box that could add and subtract by using a series of gears and wheels.