On ships, the anchor cable is stowed in what is known as the cable locker. The inboard end of the cable is fastened to a deck-plate at the bottom of the cable locker. The outboard end of the cable is fed up through a hause pipe and over a windless or capstan. The capstan is used to maneuver the cable from the cable locker and out through the hause pipe which is situated in the eyes of the ship. On the outboard end of the cable is fastened the ship's anchor. Each ship is fitted with two anchors; a port anchor and a starboard anchor.
Most landsmen think that it is the anchor that holds the ship in place while a ship is at anchor. This is incorrect; it is actually the weight of the anchor cable ranged over the anchorage (sea bottom) which holds the ship to the bottom. The anchor flukes dig into the sea bottom to maintain a fixed point so that as the ship passes over it and continues on her track, the cable is ranged along the ship's track to a predetermined point (depending on the depth of the anchorage). When a sufficient amount of cable has been paid out, the brake on the capstan is engaged and the ship swings to her anchor and settles down.
Depends how deep the hole is. If you can safely climb into the hole, then you lift it out. Or you can pull it out by tying a rope around it. You shouldn't try to do this alone.
When someone sees something, commonly a decision, to the end whatever the result, how dark and wicked it may be. go to the bitter end is an old mariners saying when the used to swing the lead to find out the depth of the water (i think, maybe it was the anchor rope(cant remember) but it meant the end of the line.. no more to feed out Exactly right, anchor ropes were tied to posts called bits, when all the anchor rope was let out, what was left was the Bit-ter end. Meaning no more rope. Usually an indication that the water was too deep to drop anchor and therefore too far from land.
There is a black hole thingy I fell in and saw it with my gogoles
A joke.
dope, microscope, isotope, envelope, rope, soap, hope, mope, cope, elope, etc. etc. The list goes on and on...
Hawsed is The hole that an anchor rope passes through.....
once u follow the crab in the cave, mix puffle o's with hot sauce, and put it through the door. collect rope and anchor. mix rope and anchor together. go to wall. throw anchor/rope on wall. u r rescued!
2m
An anchor line is a very heavy rope or chain by which a ship's anchor is hoisted.
rode
Steel chain is the best type of anchor rope.
1955
the length should be 4 times the depth of water in which you are trying to anchor.
10m
The rope (or "line" as we call it in the nautical world) is called the anchor line. However the the chain, shackle,gear & line that are attached between the actual anchor and the vessel is referred to as the "rode".
The links mean nothing. Rope is sometimes portrayed. Either where used to anchor ships in the age of sail.
the word "reeve" is defined as follows.pass a rope through; "reeve an opening"fasten by passing through a hole or around somethingfemale ruff