0
Specify the crystal frequency required for an 8085 system to operate at 1.1mhz?
Wiki User
∙ 13y ago
The crystal frquency in an 8085 system is twice the desired clock frequency, so a crystal of 2.2 MHz is required to operate at 1.1 MHz.
Note: Clock frequency is not the same as instructions per second, because the instructions in an 8085 take a variable number of clock cycles, between 4 and 18, to execute.
Wiki User
∙ 14y ago
Wiki User
∙ 13y agoIn 8085 requires a 2.2mhz crystal to operate at a system clock of 1.1mhz. The internal clock generator of the 8085 divides the crystal frequency by 2.
Add your answer:
Earn +20 pts
What is the power dissipation for TTL?
power dissipation of a logic circuit is usually defined as the supply power required for the gate to operate with a 50% duty cycle at a specific frequency.
What is a word for a used to measure the power required to operate a device?
voltmeter
What will happen when you will operate a 50 hertz machine with 60 hertz generator?
The difference in frequency would cause the compressor to operate out of its design limits. It would not cool properly and fail prematurely.
Will a 110V 60Hz home theater system bought in the US work in Singapore which uses a 220V 50Hz by just using a voltage transformer?
Your stereo system has an internal transformer in the power supply that is designed to operate at a given frequency. If it is designed to operate at the load your stereo system will use at 50 Hz, then yes. Otherwise this transformer will overheat when connected at the wrong frequency, and will burn out. You might be lucky and the power supply may be labelled to operate at 50 or 60Hz; if not, I recommend contacting the manufacturer. A voltage transformer will convert 50Hz 220 to 50Hz 110. To change frequency, you need special equipment.
What is a tuned rf jfet amplifier?
It's a junction gate field effect transistor that has it's bandwidth tuned to operate (amplify) in the radio frequency range.
What is the crystal frequency required for an 8085 system to operate at 101 MHz?
There is no 8085 that operates at 101 MHz. The fastest 8085 operates at 12 MHz, requiring a 24 MHz crystal.
What is the power dissipation for TTL?
power dissipation of a logic circuit is usually defined as the supply power required for the gate to operate with a 50% duty cycle at a specific frequency.
What is the operating frequency in which bluetooth operate?
2.4 ghz
Which of the following is required to operate a boat in Alaska?
To operate a boat in Alaska, you are required to carry on board your certificate of number.
To operate a boat in Washington DC what is required?
To operate a boat in Washington D.C., you are required to carry on board your Certificate of Number.
Is required to operate a boat in Florida?
your certificate of number To operate a boat in Florida, you are required to carry on board your certificate of number.
What is required to operate a boat in Florida?
your certificate of number To operate a boat in Florida, you are required to carry on board your certificate of number.
Is a computer required to operate and iPad?
no
Which parameter is a specific frequency at which a wireless access point will operate?
Channel
What is selective amplifier?
Selective amplifier is an RF amplifier which selects particular frequency and amplifier so it can operate at fixed frequency.
What is the operating frequency of 8085 microprocessor?
From the Wikipedia article, it looks like they would operate at 3, 5, or 6 megahertz (MHz), or maybe it's 3.5 MHz and 6 MHz (they use 3,5 - not sure if that's a European decimal point or a comma)
What are some devices required to operate entertainment software?
Specific hardware is often required to operate the software, such as a joystick, handheld device, or console.
