0
A 61 year old Poulan that still runs?? Wow! Understandably, you would be facing a dead end trying to find an owners manual for that one (though you could try writing Poulan direct - it can't hurt), but back in 1950, the majority of two-stroke engines were still using a 16 to 1 gas/oil ratio. It will smoke like crazy, but you are guaranteed that is safe, at any rate.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the oil to gas mixture for poulan pro blower?
Poulan Pro PPBP300 40:1
What is the proper gas to oil mixture for a Poulan 260 Pro chainsaw?
.025:1, gas to oil
What is fuel mixture for stihl chain saw?
The fuel mixture for a Stihl chain saw is gas and oil.
What is the Poulan string trimmer fuel mixture?
Typically most poulan string trimmers are 2 cycle products. Most consumer products are mixed at 40 to 1 mixture, 3.2 oz of 2 cycle oil to 1 gallon of gas. higher end commercial product is a 50 to 1 mixture, 2.6 oz of 2 cycle oil to 1 gallon of gas.
What is the fuel mixture for a McMulloch 610 chain saw?
1 oil to 40 gas.
What is the gas mixture for mcculloch chain saw 36 cc ms1436nav?
40:1
What is the oil gas mixture ratio in the Poulan chain saws?
From Poulan website: The fuel-oil mixture ratio for all Poulan two-cycle products is 40:1. You can obtain this ratio by mixing 3.2 oz. of oil with one gallon of regular gas. If you have other brands of equipment that require different fuel/oil ratios and you don't want to mix separate fuel cans, you should use the lowest numerical ratio. For example, if you have products requiring 40:1, 50:1, and 32:1 ratios you should use the 32:1 ratio for all products. This may cause slight smoke increase in the exhaust in the 40:1 and 50:1 products due to more oil in the fuel, but it won't damage either of the engines.
You replaced fuel line on poulan chain saw still no gas will go to carburetor there is no primer bulb?
Poulan has a diaphragm that goes bad in the carb. It's not expensive to fix it yourself if you do things like that. Take it in and it's $50.00. Plug foul out often too and simulate a fuel problem. Good luck!
What is the fuel gas mixture on husqvarna model 350 chain saw?
You won't go far wrong using a 40/1 mixture and adjusting if you need to.
What is the Gas oil mixture for chain saw?
I've had one, but have friends with many, and all seem to use 40-1 for max power.
Is natural gas element or mixture or compound?
Natural gas is a mixture.
Is a Nobel gas a mixture?
mixture
