0
Judging by the video of someone using the starter to break the bolt loose the threads are regular right handed threads
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Are the threads on the harmonic balancer bolt for a 93 dodge Dakota reverse or standard thread?
Standard.
Are the threads right or left hand on 1997 regal harmonic balancer bolt?
Right handed.
Are the threads on the bolt left or right thread where it goes through the harmonic balancer and in the crank on 1974 Chevy 350 c you engine?
They are standard right hand threads.
How do you Remove a Harmonic Balancer on 1996 Chevrolet carprice classic?
You will need a harmonic balancer puller. Remove crankshaft bolt and washer, reinstall bolt without the washer approximately 10 turns. This will protect the threads in the crankshaft. Install puller and remove balancer. You cannot remove the balancer without this puller. They are inexpensive or try to borrow one.
Remove Taurus harmonic balancer?
Remove belt,4 pulley bolts and remove pulley. Remove harmonic balancer bolt and washer,reinstall bolt with out washer,just in about half way.You will need a harmonic balancer puller.These are not very expensive about $20.00 or borrow one from somebody.You just thread the correct included bolts into the balancer where you removed the pulley bolts and will be pushing on the reinstalled balancer bolt.The balancer should clear the bolt head without the washer.This is so you don't damage the threads in the crankshaft.
How do you take off the harmonic balancer on a 1988 Ford Ranger?
Pull the belts, remove the center retaining bolt then use a harmonic balancer puller to remove the pulley. Make sure you use a disk that will protect the threads of the cranshaft when you tighten the puller.
Removing harmonic balancer Chevy engine?
Remove the big center bolt that holds the harmonic balancer in place. If you have a complete hub puller assembly, it should screw into threaded holes. You'll need to work something out to protect the crankshaft threads when you tighten down the puller, just be aware that you don't want to destroy the crankshaft by messing up the threads. Tighten the puller and it should remove the harmonic balancer for you.
How do you remove the harmonic balancer on a 1996 dodge neon?
loosen the center bolt and get your self a harmonic balancer puller just make sure you loosen the center bolt enough but not too much but you need a balancer puller.
Is the harmonic balancer bolt metric on a 91 thunderbird?
yes
How do you change harmonic balancer on 1991 buick lesabre?
The flywheel has to be held in place by a holding tool, Remove the mounting bolt, then use a balancer remover to pull the harmonic balancer.
What size bolt is the harmonic balancer bolt for a 2002 4.7 Dodge Engine?
M14x1.5
How do you remove a crankshaft pulley on a 67 Chevelle?
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
