answersLogoWhite

0

Is pulley and flywheel the same?

Updated: 10/31/2022
User Avatar

Wiki User

14y ago

Best Answer

Fly wheel and pulleys are two different parts. The use of fley wheel is storing energy from rotationam motion, however pulley is used to transmit energy to an other part by belt

User Avatar

Adem Endris

Lvl 2
3y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

No, they are not the same.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Is pulley and flywheel the same?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Two five inch pulleys are connected by an untwisted straight belt If the pulley is turned clockwise at15 rpms in what direction and how fast will the second pulley turn?

same dia/same speed


What is a compound pulley?

a coumpound pulley is when there is a fixe pulley and movable pulley working together


What is the formula to determine speed of a driven pulley or sprocket using RPM and Diameter?

For a pulley, it is driver RPM x driver diameter = driven RPM x driven diameter. Keep in mind that the diameter you should use is the diameter where the belt is riding in the pulley. For instance, an A belt in an AB pulley will ride lower in the pulley than it would in an A pulley. For sprockets, the formula is the same, but replace the diameter with # teeth. It looks like this. driver rpm x # teeth of driver sprocket = driven RPM x # teeth of driven sprocket


How do mechanical press work?

a flywheel and clutch which is on the same shaft and a motor (which rotates the flywheel),also a ram(the moving assembly of press) is connected to the clutch..when motor rotates the flywheel and we apply electrical supply to the clutch..the clutch engaged with the flywheel.we get a motion into the ram.................................................................................................................................................................hun etho simple ni koi das sakda.............................


How many type in pulley machine?

Pulley machine type of many! Machine have many pulley, many pulley machine! Type machine, many pulley type. Pulleys, type pulley machine many type. Machine.

Related questions

What cylinder is no 4 on a 1974 beetle?

Cylinder 1 is at the flywheel end of the engine, on the same side as the starter. In countries with left-hand drive, that's the passenger side. Cylinder 2 is on the same side as cylinder 1, at the pulley end. Cylinder 3 is on the other side of the engine at the flywheel end. Cylinder 4 is on the same side as cylinder 3, at the pulley end.


Where are the timing marks on a 2000 Hyundai Accent 1.5 Liter Single Overhead Cam?

The timing marks can be found on the front main pulley and on the flywheel. The timing marks will be scattered around the outside of the pulley and the flywheel.


What is another word for flywheel?

Flexplate, flywheel same thing


Diagram of number one cylinder location on a 65 Volkswagen?

If you're standing at the back of the car, or you're at the pulley end of an uninstalled engine, it's at the flywheel end of the engine on the right side. Number two is on the right side at the pulley end. Number three is at the flywheel end on the left side, and number four is on the left side at the pulley end.


1998 jeep Cherokee fan blades hit crankshaft pulley The pulley apears to be out of alignment with the others Advice please?

i am having this same problem and i couldn't figure out why this was because when i inspected the pulley it appeared to be up against the engine, but i just figured out that the pulley is acually two pieces (the pulley and vibration dampener that it sits on) that can separate and cause the pulley to move towards your fan. you will need to replace the pulley/vibration dampener. You will probably need to expose your flywheel and have a friend put something against it to keep the engine from turning over when doing this.


Is a big block flywheel the same size in circumference than a small block flywheel?

NO it is bigger.


Where is the crankshaft in a 1998 dodge avenger?

The crankshaft is in the lower part of the block. The connecting rods, flywheel, and crank pulley all bolt to it.


Are the Chevy 400 flywheel and 350 flywheel the same?

No. The 400 is externally balanced, the 350 is internally balanced.


Is an olds 307 and a Chevy 350 flywheel the same?

NO


1968 Chevy 6 cylinder flywheel part 3791021 Will it work on a Chevy 283 or 327?

Yes, it is same flywheel.


Does the flywheel on a car make a knocking sound?

Yes it does, i have 2007 vw passat 2 litr tdi automatic car, the mechanic first diagnosed it as pulley fault but later on find out it was the flywheel, its a common fault with dual mass fly wheel


Is crank pulley same as harmonic balancer repair?

In most cases the crank pulley bolts to the balancer so the crank pulley would not be the same as the harmonic balancer.