Second or third cant remember which.
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
It is a third class lever machine because The effort is in between the load(food) and the fulcrum(handle)
To install an exterior door handle on a Cherokee Jeep, first remove the window crank handle and the three screws in the inner door trim panel. Second, remove the inner door panel from the door using a trim stick and take off the vapor barrier inside the door. Third, remove the nut on the rear of the door handle, position the exterior door handle, and secure in place.
Yes
second class lever
you grab the handle and PULL
try this site. http://www.jagsthatrun.com/Pages/Parts_S10-Third-Door-Handle.html
log on to eBay and log in seller enigma326 he has complete installation instruction on the page that he is selling the handle.
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
Inside door handle or outside door handle?
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.