If it came stock with a 4 barrel carb and has the large harmonic balancer, it's probably a 4 bolt main.Repost with the engine number stamped on the machined flat pad on the passenger front of block just below the front of the passenger side cylinder head.
If it's the factory engine, then it will be a 2-bolt main engine.
It is a small block Chevy 350 engine with 6 bolt main caps.
usually
A Chevy 8970010 is a 4 bolt main 350 cubic inch engine. It is classified as a small block and is placed in a variety of automobiles from sedans to light trucks.
70 ft lbs
If its a 1/2 ton it will be a 2- bolt main, You can run the engine # if you need to know for sure. But i'd bet its a 2-bolt
Probably.
That engine could be anywhere from a 1969 to 1972 350. Some of them were 4-bolt mains and some were just a 2-bolt main engine.
Journal Diameter is 1.8682-1.8692 Lobe lift intake is-.2600 Exhaust is-.2733 Camshaft end play is--.004-.012 This is a 1978 350 engine, 4-bolt main makes no difference.
which bolts are you talking about? every different size bolt has a different torque spec.
i have a engine with this # and its a 2 bolt main
Yes they sure did. It could be a 4-bolt main engine.